www.cuckoo.co.kr
HOW TO CLEAN
2. To close the top cover, the handle must
be located at “Unlock” as shown by the
picture on the right.
1. Check the inner pot correctly put in the
main body.
3. If there are hot things in the inner
pot, the top cover would not be
closed. At the time twist the
pressure weight and let the steam
out and then close the top cover.
Do not try to close the top cover by force. It can cause problems.
Cautions when top cover does not close perfectly
How to clean the soft steam cap
Do not touch the surface of the soft steam cap right after cooking. You can get burned.
Detach the soft
steam cap like the
picture.
Press the hook in the back, and follow the arrow to
detach and clean. Make sure you clean frequently
with a sponge or a neutral detergent.
Assemble the vent
so that it fits into
the groove
perfectly.
After you attach the soft steam
cap to fit into the groove, press
‘A’part firmly to assemble the
soft steam cap into the product.
Separate dew
dish.
Separate the drain
ditch cap by
pushing it down.
Clean the drain
ditch cap and dew
dish with a neutral
detergent.
Clean the drain
ditch cap with
brush kit.
Securely put in the
dew dish after
cleaning.
How to clean dew dish
Separate cover as
the arrow points.
Use brush kit. you
can easily clean a
drain use the ditch
cap and tough
part to clean.
When using
cleaning pin, pull
out cleaning pin
and make it meet
at right angles.
Only use for the
valve hole of the
pressure weight.
Separate cleaning pin
Attached on the bottom of the
unit from main body as shown
in picture
How to use cleaning pin and brush kit
The valve hole of the pressure weight allowing the escape of steam should be checked regularly to
ensure that it is not blocked.
If you use the valve hole of pressure weight as it is blocked, the hot steam or any hot content within the
cooker can cause injury.
Do not use a Cleaning Pin for other use except cleaning the valve hole of the pressure weight.
Soft steam cap
Cleaning Pin
If the valve hole of the pressure weight part is clogged, punch it with the cleaning pin
How to
disassemble the
pressure weight
After the Lock/Unlock handle is locked(located on “Lock”) turn the pressure weight counter-
clockwise while pulling it up, and pull it out.
Punch the clogged valve hole with the cleaning pin and reassemble it by turning it clockwise.
When the pressure weight is properly assembled, it can freely be turned.
Attached on the
botton of the unit.
Alien
Substance
Pressure Weight
neutral
detergent