The valve hole of the pressure weight allowing the escape of steam should be checked
regularly to ensure that it is not blocked.
If you use the valve hole of pressure weight as it is blocked, the hot steam or any hot content within
the cooker can cause injury.
Do not use a Cleaning Pin for other use except cleaning for the valve hole of the pressure weight.
Wipe the top cover
with a wet cloth that
has been squeezed
out of all the water.
Check if there is any rice or
alien substance on the oven
packing.
Wipe the inner upper and
outer of the inner pot of any
alien substance.
Wipe the main unit with
a wet cloth that has
been squeezed out of
all the water.
If there is any alien
substance on the
temperature sensor
carefully wipe it out
without damaging the
metal plate.
1. Locate the handles of the inner
pot on the slot of the main unit.
(Refer to the following figure.)
2. Open and close the top cover
with the handle located on
“Unlock”.
Cook and warm the rice with
the handle located on “Lock”.
When steam is full inside the inner
pot, the handle will not turn At this
time twist the pressure weight and
let the steam out.
Cleaning Pin
Valve
Attached on the bottom of the unit.
Pressure
Weight
How to
disassemble
the pressure
weight
Under the Lock/Unlock handle is locked (located on "Lock") turn the pressure
weight counter-clockwise while pulling it up, and pull it out.
Punch the clogged valve hole with the cleaning pin and reassemble it by turning it clockwise.
When the pressure weight is properly assembled, it can freely be turned.
