HOW TO CLEAN
13
www.cuckooworld.com
ENGLISH
How to Clean the Pressure Weight Nozzle.
2.
To close the lid turn the 'Lock
/Unlock' handle counter-clockwise.
1. Check to make sure the inner pot is
placed correctly inside the main body.
3. If there is excess steam inside the
inner pot it might be difficult to lock
the handle. Twist the pressure
weight and allow excess steam
to release. Then try to turn the
handle again.
Do not try to close the lid by force. It can damage the cooker and cause problems.
When Lid Does Not Close Perfectly
❶ Remove the dew
dish from the
cooker.
❷
Detach the dew dish
by pushing down.
❸ Clean the dew dish
with soft dish
detergent.
❹
Securely fit the dew
dish back to the
cooker after
cleaning.
❺ Re-insert the dew dish
by following the arrow
found on the image
above.
How to Clean Dew Dish
neutral detergent
•The valve hole of the pressure weight allows steam to release. Check regularly to ensure that it is not
blocked. If the valve hole of the pressure weight is blocked, hot steam and hot content within the cooker can
cause serious injury.
※Do not purpose the cleaning pin for any other purpose except to clean the valve hole of the pressure weight.
Cleaning Pin
If the pressure valve hole is clogged, puncture it with the cleaning pin
How to
Disassemble
Pressure Weight
▶ Twist the 'Lock/Unlock' handle to 'Lock' and pull the pressure weight upwards and twist counter-
clockwise to unscrew and remove the pressure weight.
▶ Puncture the clogged valve hole with the cleaning pin and reassemble the Pressure Weight it by
turning it clockwise.
▶ When the pressure weight is properly assembled, it can freely be turned.
Pressure Weight
※
A
tta
c
h
e
d
o
n
th
e
b
o
tto
n
o
f th
e
u
n
it.
Alien
Substance
Soft steam cap
How to Clean the Soft Steam Cap
Do not touch the surface of the soft steam cap right after cooking. You can get burned.
❶ Detach the soft
steam cap as
shown on the
image.
❷ Press the hooks in the front in direction of arrow to detach
the bottom case. Clean the parts frequently with a sponge
or a neutral detergent.
※
Before reassembling the packing with the bottom case, make
sure to put the packing into the packing groove.
※
In order to separate the steam cap into parts, pull bottom part
downward by pressing the extrusion parts on both sides.
❸ Before reattaching the
parts, fit the bottom case
into the groove of steam
cap perfectly. Press the
hooks according to the
arrow to assemble the
parts together.
❹ After attaching the
soft steam cap on
the lid as shown in
the image press
the cap firmly to
reassemble cap
back into the
product.
packing
groove of steam cap
packing groove
383-987F.rev.0.qxp_383-915G rev.0 190*260.qxp 2017. 6. 26. 오전 9:40 페이지 13
