723525

Cuckoo CRP-BH06 Fuzzy Series Manual

29
Zoom out
Zoom in
Previous page
1/42
Next page
HOW TO PRESET TIMER FOR COOKING
ENGLISH
Check if the current time and the menu are correct.
Refer to page 15 for the time setting.
If the current time is not set correctly, the presetting time will also be incorrect.
Make sure not to confuse AM and PM.
1
Turn the Lock/Unlock handle to the lock position and
a lock icon will be displayed on the screen.
Then press the “Preset/AUTO CLEAN” button.
“Menu/Selection” will blink, and “Preset/Auto Clean”,“Set”, Cancel
“Pressure Cook/Turbo” buttons will turn ON.
When Cuckoo is released to the market, Preset 1 is set at 6:30 am
and Preset 2 at 7:00 pm. If you want to accept these preset times,
select. Preset 1 and/or Preset 2.
If you press the Preset/Auto Clean button while the Lock/Unlock
handlle is unlocked, you will not be able to set the preset time.
If you press the Preset/Auto Cleaning button, the previous preset time.
will be displayed as shown in the picture and Preset 1 and Preset 2 will
blink. Then you will hear a voice message: “Please set the cooking
finish time with Menu/Selection button and press Pressure Cook/Turbo
button or Set button.
In GABA mode, preset on “ ” is possible.
If you want to preset “Timer” while keeping warm, cancel keep warm
and preset the “Timer”
2
Preset the time.
3
Press “Pressure Cook” button.
“Pressure Cook/Turbo” button will blink, and “Menu/Selection” and
“Cancel” buttons will be turned ON.
It says that preset cook for glutinous is booked
Preset cook will be completed at the timer
Once cook is completed with preset time, Preset time is stored in the
memory. Don't need to set up time again.
If a small amount of rice is cooked, rice could be finished earlier than time
you set up.
5
Select menu with “Menu/Selection” button
“Set button” will blink, and “Menu/Selection”, “Pressure Cook/Turbo” and
“Cancel” buttons will turn ON.
In case of setting up timer while warming 10min increase by
pressing “ ”button
Please set up timer after canceling warming 10min decrease when you
press “ ” button If you keep pressing, It can be changed continuously.
Please be careful not to change from AM to PM.
4
How to preset timer for cooking
How to preset timer for cooking
“Set” button will blink, and “Menu/Selection”, “Cancel” and
“Pressure Cook/Turbo” buttons will turn ON.
When preset time is set to
AM07:40
www.cuckooworld.com
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cuckoo CRP-BH06 Fuzzy Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cuckoo CRP-BH06 Fuzzy Series in the language / languages: English as an attachment in your email.

The manual is 15,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info