657564
26
Zoom out
Zoom in
Previous page
1/37
Next page
| 47 46 |
MTB/ ROAD BIKE/ TREKKINGMTB/ ROAD BIKE/ TREKKING
3. On saddle stem quick release levers:
instead of the nut, turn the bolt with the
Allen key head itself clockwise.
4. Tilt the excentric lever so that it appro-
ximately forms the extension of the hub
axis Hold the lever in this position.
5. Now turn the nut or the Allen key bolt
head until the excentric lever, when
turned around its bearing more than 90°
to meet slight resistance (it now forms an
approximately straight line extension of
the hub axis.
6. Now press the lever through a further 90°
until it reaches its end stop.
Risk of Personal Injury and Material
Damage!
Incorrect operation of the brakes can lead
to dangerous riding conditions, falling,
accidents and material damage.
If the lever is pressed into its stop po-
sition, the wheel is not secured tightly
enough and can become displaced during
riding or loosen.
There is a danger of falling.
2. Turn the nut counter-clockwise until the
wheel can be removed from the frame or
front forks without any great eort.
Should the nut come right o the screw,
please ensure that the little springs do
not get lost.
3. On saddle stem quick release levers: To
loosen, instead of the nut, turn the bolt
with the Allen key head itself counter-
clockwise.
Tightening: Reverse the procedure
1. If the quick release lever was completely
removed then push it from the left (in the
direction of travel) through the hub.
2. Place the springs and the nuts on the bolt.
Turn the right end now protruding from
the hub and the nut clockwise.
The ends of the springs with the smaller
diameter always face the hub.
On saddle stem locking quick-releases,
instead of the nut there is a bolt head with
an Allen key hexagon insert head.
Special types:
Some road wheels are xed with oating axles or
a combination of oating axle and quick-release
lever or are equipped with other axle clamping
systems. Please refer to the accompanying inst-
ructions on the handling of these parts provided
by the suspension fork manufacturer and/or
consult your specialist dealer.
To open the quick release:
1. Push the excentric lever away from the
hub. It can now be rotated 180° around
its axis.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cube Road bike at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cube Road bike in the language / languages: English as an attachment in your email.

The manual is 4,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cube Road bike

Cube Road bike User Manual - German - 75 pages

Cube Road bike User Manual - Dutch - 37 pages

Cube Road bike User Manual - French - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info