779509
89
Zoom out
Zoom in
Previous page
1/105
Next page
| 35
CARGO HYBRID CARGO HYBRID
Bild: Adjusting the handlebar height
Observe the minimum insertion depth
of the handlebar stem (see chapter
7.1.2Note the minimum insertion depth
(seat post and handlebar stem)).
3.
Fix the adjustment by closing the quick-release
on the handlebar stem again.
4. Make sure that the quick-release is in maxi-
mum contact with the handlebar stem and
is securely closed.
Bild: Handlebars height fixed
7.3 Adjusting the seat position
To adjust the seat position, you need a
hexagon socket spanner and a torque
wrench of the appropriate size.
To adjust the horizontal position or inclination
of your seat:
1.
Loosen the clamping bolts by a few turns
until the seat can be moved easily and/or
the inclination can be adjusted.
2. Move the seat to the desired position.
When changing the horizontal position,
pay attention to the adjustment range
on the seat struts.
3.
Fix the adjustment by tightening the clamping
screws as follows:
Tighten the clamping screws alternately by
a quarter to half turn until the prescribed
torque is reached (see chapter 3.5.2“Torques
and screw connections”).
4.
If the marking on the seat post cannot be
found in chapter 3.5.2Torques and screw
connections under “Tightening Torques,
consult your specialist bicycle dealer.
7.4 Adjusting the seat height
The seat post is fixed with a clamp in
the seat tube of the frame.
The clamp is fixed with a quick-release
lever.
When attaching an (additional) clamp
(e.g. for anti-theft protection), observe
the information in the manufacturer's
instructions for the clamp.
1.
Open the clamp by unfolding the quick-release
on the seat tube to the outside.
2. Move the seat and seat post to the desired
position for your seat height.
Observe the minimum insertion depth
of the seat post (see chapter 7.1.2„Note
the minimum insertion depth (seat post
and handlebar stem)“).
Bild: Adjusting the seat height
89


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cube Cargo Hybrid 2022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cube Cargo Hybrid 2022 in the language / languages: English, German as an attachment in your email.

The manual is 1.14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info