779509
84
Zoom out
Zoom in
Previous page
1/105
Next page
30 | CARGO HYBRID
1. Check the head set as described below.
It must be possible to steer the front
wheel smoothly and without play in
both directions.
Stand next to your Cargo Hybrid and hold
it with both hands on the handlebar grips.
Pull the front brake, keep it pulled.
Push your Cargo Hybrid back and forth
with short, jerky movements.
There must be no play in the head set: There
shall be no audible or palpable crackling.
Crunching noises are also not allowed.
2.
If you find that the head set has play, proceed
as described below:
The head set on the handlebars has play:
Adjust the head set correctly on the han-
dlebars (see Speedlifter manufacturer's
manual).
The head set on the handlebars has play:
Contact your bicycle dealer to have the
steerer tube clamping adjusted correctly.
6.8 Checking the suspension fork
Î
Check your suspension fork as described
below.
Pull the front brake and keep it applied.
Press with your body weight on the
handlebars so that the suspension fork
deflects.
The fork must spring in and out smoothly.
There must be no cracking or crunching noises.
Clamp the front wheel between your legs
and try to pull up the Cargo Hybrid at the
front triple clamp. Take care not to move
or damage the headlamp and fender.
The stanchions must not come loose from the
dip tubes or from the triple clamp.
ÎFor testing, also observe the instructions in
the separate component instructions for your
suspension fork.
6.9 Checking the brakes
WARNING!
Danger of brake failure!
A malfunction of the brakes is life
threatening.
ÎCheck your brake system particularly
carefully.
Î
Clean dirty brake discs immediately:
Dirty brake discs can reduce the braking
effect.
1.
Check the function of your hydraulic disc
brake as described below.
Operate both brake levers to the stop
while standing still.
Make sure that the brake levers cannot
be pulled completely onto the handlebar
grip: There must always be a gap between
the brake lever and the handlebar grip,
even when the brake lever is pulled to
the maximum limit stop.
Bild: Brake lever fully applied
Try to push the Cargo Hybrid with the
brakes applied. Both wheels must remain
locked.
2.
Pull the brake calliper alternately in all
directions with manual force.
The brake calliper must not move.
3. Check the tightness of your brake system:
Operate the respective brake lever while
standing still and hold it.
Check the brake system from the brake
lever through the lines to the brakes.
Hydraulic fluid must not leak out at any point.
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cube Cargo Hybrid 2022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cube Cargo Hybrid 2022 in the language / languages: English, German as an attachment in your email.

The manual is 1.14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info