779504
66
Zoom out
Zoom in
Previous page
1/72
Next page
66 | MTB/ ROAD BIKE/ TREKKINGMTB/ ROAD BIKE/ TREKKING
1. On carbon seat post and/or saddle
Apply assembly paste to the seat post and
to the inside of the seat tube and only use
assembly paste for carbon parts for this
procedure.
Seat post and seat tube must not be gre-
ased. Only carbon assembly paste may be
used.
Seat posts made of aluminium may only be
tted using a carbon assembly paste.
2. Push the saddle with seat post into the
seat tube until the desired saddle height
is obtained. In this position the lower end
of the seat post (length (x)) must be at
least (y) mm below the top edge of the
seat tube (see denition below).
Do not rely on the marking on the seat
post.
To check the correct insertion distance (y):
hold a nger tip against the seat post
when tted directly above the clamp.
Keep your nger tip in this position and
withdraw the seat post from the seat
tube.
Hold the seat post laterally beside the
seat tube so that your nger is again level
and directly above the clamp.
In this position the lower end of the seat
post (length (x)) must be at least (y) mm
below the top edge of the seat tube.
120mm (y) at 400mm (x)
120mm (y) at 420mm (x) RockShox Reverb
110mm (y) at 380mm (x)
100mm (y) at 350mm (x)
3. Turn the saddle so that the saddle points
in the direction of travel.
4. Ensure that the clamp is ush in the frame
and that the seat tube slots and the clamp
are covered.
5. Close the quick release as per chapter 8.8
or tighten the allen screw with a torque
wrench.
Please observe assembly instructions and
the specied torque in the accompanying
parts instructions indicated in table 3.3.
Risk of Personal Injury and
Material Damage!
An over-tightened carbon bre seat post
can break when riding and lead to dange-
rous riding situations, falling, accidents
and material damage.
The seat tube clamp must be tightened
rmly in order to prevent the seat post from
lowering into the frame or laterally twisting
during the ride.
If the seat post does not remain in the desi-
red position, even though you have reached
the maximum admissible tightening torque,
please consult your specialist dealer imme-
diately.
Please observe assembly instructions and
the specied torque in the accompanying
parts instructions
66


Need help? Post your question in this forum.

Forumrules
1

Forum

cube-2022

Reset search

  • How is chain tension adjusted on Cube Compact Ebike with 5-speed Hub gear Submitted on 27-1-2024 at 16:00

    Reply Report abuse
  • I never got a manual when purchasing my cube hybrid supreme 400 e bike. Is it available?
    Kathy Submitted on 13-7-2023 at 14:26

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cube 2022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cube 2022 in the language / languages: English as an attachment in your email.

The manual is 3.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cube 2022

Cube 2022 User Manual - German - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info