779510
50
Zoom out
Zoom in
Previous page
1/73
Next page
| 49
MTB/ ROAD BIKE/ TREKKINGMTB/ ROAD BIKE/ TREKKING
8.8.6 Assembling / disassembling a quick-
release thru axle on the rear wheel
Risk of personal injury and material
damage!
Always observe the operating manual of
the thru axle manufacturer.
Risk of material damage!
Check the correct t of the thru axle
before every use.
1. Insert the wheel into the frame at the
same time as attaching the chain and
inserting the brake disc into the brake
calliper. Make sure the thru axle is
inserted straight, to prevent damage to
the thread. To prevent damage to the
thread and other components, the thru
axle must not be tilted or sti to turn
while inserted/screwed in.
2. Tighten the axle to achieve a secure t
by using the lever and applying manual
force. Do not exceed a tightening torque
of 16Nm.
3. If the lever is in a dicult position to
apply manual force onto, loosen the lever
fastening mechanism on the axle using
two ngers. This can be loosened by turn-
ing it 180° anticlockwise with two ngers.
The lever can now be pulled slightly
away from the axle and turned into any
position you choose. To retighten the
axle, reposition the lever on the axle in
a comfortable position and tighten the
torque again.
4. Once you have tightened the axle
enough, position the lever so that it
points towards the front-end of the bike
and slide the lever onto the axle. Now
turn the xing screw 180° clockwise to
secure the lever against working itself
loose.
5. To release the axle, turn the lever
anticlockwise. If you cannot apply
enough force to the lever in the current
position, follow steps 1 to 4 in reverse.
Then you can adjust the position of the
lever to make it easier to loosen.
A folding cam lever is often used on
suspension forks to clamp the axle. After
screwing in the axle, this lever must be
folded and secured hand-tight. Failure
to do so may result in the lever working
itself loose, at the risk of causing an
accident!
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cube 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cube 2021 in the language / languages: English as an attachment in your email.

The manual is 3.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cube 2021

Cube 2021 User Manual - German - 73 pages

Cube 2021 User Manual - Dutch - 75 pages

Cube 2021 User Manual - French - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info