779503
124
Zoom out
Zoom in
Previous page
1/148
Next page
48 | MTB/ KID/ TREKKINGMTB/ KID/ TREKKING
8.8.4 Assembling / disassembling
the thru axle
1. Set the wheel in the fork or the frame
while threading the disc brake into the
brake calliper. Ensure that the thru axle
is inserted straight, so as not to damage
the thread. The thru axle cannot become
tilted while you are screwing it in. Do not
force the axle, as both of these issues may
damage the thread.
2. Use a hex wrench to hand tighten the
thru axle.
8.8.1 Operate the thru axle
8.8.2 General information
Thru axles are used on both the frame and fork of
CUBE models. All CUBE models use the advanced
and secure X12 thru axle system on the frame (MTB
+ Road) and fork (Road). For further information on
the Syntace X-12 thru axle system: www.syntace.de
All of our MTB models use manufacturer-specic
15mm or 20mm thru axles on the suspension fork.
8.8.3 Before installation
Please inspect the clamping surface and
thread of the thru axle, the frame, and the
fork for dirt before installing the thru axle.
Dirt and contamination could aect the
safety of the axle system. We recommend
lightly greasing the axle threads.
Danger of personal injury
and property damage!
Important information on handling and
using thru axles
Never use tools besides those recom-
mended by the manufacturer to attach
the axle. Always work using a torque
wrench.
Never exceed the maximum torque
indicated by the manufacturer!
Always read the operating manual from
the suspension fork or wheelset manu-
facturer before starting to use a fork /
wheelset combination with thru axles, or
before adding thru axles.
Danger of property damage!
Check to ensure the thru axle is in the
correct position before every use.
Wheelsets and thru axle that are installed
incorrectly can lead to serious crashes
and accidents! Ask your CUBE dealer
how to safely use the type of thru axles
installed on your Bike.
Standard thru-axle X12
3. Then, tighten the thru axle in place with
a torque wrench according to manufac-
turer specications. The torque limits are
clearly marked on the thru axle.
4. To remove the thru axle, you must
unscrew it using a hex wrench.
124


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cube 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cube 2018 in the language / languages: English, German as an attachment in your email.

The manual is 5.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info