779503
115
Zoom out
Zoom in
Previous page
1/148
Next page
| 39
MTB/ KID/ TREKKINGMTB/ KID/ TREKKING
Move the saddle to the desired position.
For seat clamps with only one xing screw:
always tighten the seat clamp with the
correct, prescribed torque. Make sure that
all loosened parts join together with the
correct alignment (see Chapter 3.3.).
For seat clamps with two xing screws:
tighten one screw just for a quarter or a half
turn then continue with the other screw
in the same way. Do this as long as you´ve
reached the right torque (see Chapter 3.3.).
Please observe the specied tightening
torques in table 3.3.
8.3 Adjust saddle height
Risk of Personal Injury and Material
Damage!
A saddle set too high for children who
are not yet able to cycle safely without
assistance, could result in dangerous
driving conditions, falls, accidents, and/or
property damage.
Adjust the seat height in such a way that the
child's feet can touch the ground when in a
sitting position.
On a gripper clamp with bolt, you need a
hexagonal socket and a torque wrench of
the correct size. For a quick-release clamp,
please see Chapter 8.8.
1. Loosen the clamp as described in
Chapter 11.2.
2. Move the saddle and saddle stem to the
desired position. Please note the inst-
ructions regarding saddle stem insertion
distance in Chapter 11.2.
3. Clamp the saddle stem as described in
Chapter 11.2.
8.4 Adjust suspension forks
1. Please read the instructions for adjusting
your suspension forks in the suspension
fork manufacturer‘s parts instructions.
2. If your forks have a xed adjustment
mechanism as shown in the illustration,
please read the related instructions in
the suspension fork manufacturer‘s parts
instructions.
Suspension forks with elastomers and/
or steel springs are only suitable for one
overall weight range (= weight of rider
+ any baggage). This weight range is
usually within 20 kg.
Only the forks pre-tensioning can be
adjusted by compressing the springs by
means of an adjuster screw. This merely
changes the initial breakaway torque of
the forks.
That is, with greater pre-tensioning, the
forks only deect at higher operating
forces.
If the forks are pre-tensioned too much,
suspension travel is accordingly less.
The weight range for which the suspen-
sion elements in your forks are suited
can be found in the fork manufacturer‘s
instructions and/or you can consult your
dealer.
If your total weight is outside this range,
have your dealer t suspension elements
matching your weight.
115


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cube 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cube 2018 in the language / languages: English, German as an attachment in your email.

The manual is 5.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info