757631
14
Zoom out
Zoom in
Previous page
1/22
Next page
User's ManualHS-2800
12
INSTALLATION OF BATTERIES
Please follow instructions below to install batteries.
1.Refer to page 11 on "DISASSEMBLING / RE-ASSEMBLING YOUR POWER CHAIR"
before installing batteries.
2.Make sure free-wheeling lever is set to "D" to engage motors.
3.Once the shrouds are removed, fasten Velcro straps that will hold batteries in place.
(See Fig. 17)
4.Locate nuts and bolts that fasten battery cables to battery and then put them aside.
5.Install new batteries, facing each other.
6.Locate one side of cables and make sure wire, marked (+), is connected to the closest
positive (red) battery terminal (See Fig. 18). Next, secure wires with nuts and bolts
provided (See Fig. 19). And then use a 10 mm wrench to tighten hardware (See Fig. 20).
7.On the same cable, connect wire, marked (-), to the closest negative (black) battery
terminal on another battery (See Fig. 18). Next, secure wires with nuts and bolts provided
(See Fig. 19). And then use a 10 mm wrench to tighten hardware (See Fig. 20).
Warning: DO NOT attach one set of cables to the SAME battery, as it will not function
correctly.
Figure 17
Figure 18 Figure 19
battery
red
redblack
black
battery
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for CTM Homecare HS-2800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of CTM Homecare HS-2800 in the language / languages: English as an attachment in your email.

The manual is 3,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info