648523
4
Zoom out
Zoom in
Previous page
1/24
Next page
6 • EN
15. FOLLOW THESE STEPS WHEN
BATTERY IS OUTSIDE VEHICLE.
A SPARK NEAR BATTERY MAY
CAUSE BATTERY EXPLOSION.
TO REDUCE RISK OF
A SPARK NEAR BATTERY:
a) Check polarity of battery terminals. POSITIVE (POS,
P, +) battery post usually has a larger diameter than
NEGATIVE (NEG, N, -) post.
b) Attach at least a 24-inch-long 6-gauge (AWG) insulated
battery cable to NEGATIVE (NEG, N, —) battery post.
c) Connect POSITIVE charger connector to POSITIVE (POS,
P, +) post of battery.
d) Position yourself and free end of cable as far away from
battery as possible – then connect NEGATIVE charger
connector to NEGATIVE (NEG, N, -) post of battery.
e) Do not face battery when making the final connection.
f) When disconnecting charger, always do so in reverse
sequence of connecting procedure and break first connec-
tion while as far away from battery as practical.
SAFETY
•D250S Dual and SMARTPASS is designed for 12V lead-
acid batteries. Do not use the unit for any other batteries.
•Disconnect battery poles before installation
•D250S Dual is not sprak proof.
•The installation must include a fuse according to recommen-
dations in table “CABLE DIMENSIONS”.
All installations on boats must follow
ISO 10133. Please note!
1. Connections from the battery must be fused close to the
battery.
2. Batteries must be permanently mounted in ventilated areas.
3. Cables must be placed in tubes, separated from cables for
110/230V (shore power), or be attach to the surface every
300mm.
4. Cables in the engine room must be rated to withstand
70°C/158°F
5. For a permanently connencet battery charger:
GROUNDING INSTRUCTIONS— This battery charger
should be connected to a grounded, metal, permanent
WARNING!
D250S DUAL and SMARTPASS is not
reverse polarity protected.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ctek SMARTPASS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ctek SMARTPASS in the language / languages: English as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ctek SMARTPASS

Ctek SMARTPASS User Manual - German - 12 pages

Ctek SMARTPASS User Manual - Dutch - 12 pages

Ctek SMARTPASS User Manual - French - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info