648461
3
Zoom out
Zoom in
Previous page
1/6
Next page
EN • 5
EN
INDICATION LAMPS:
START/PAUSE LAMP
Indicates that charging has not started or has been interrupted.
Press START/PAUSE-button to start/resume.
POWER LAMP
Indicates that mains supply is connected.
ERROR LAMP
Indicates that a fault has occurred.
Se ERROR CODES for description.
Press START/PAUSE-button to clear error and interrupt charging.
TEMPERATURE SENSOR LAMP
Indicates that the temperature sensor is activated.
Voltage is automatically adjusted to optimize charge at
ambient temperature.
REDUCED CURRENT LAMP
Indicates that the maximum current is limited.
SET
A
Ah & info
V
h
1 2 3 4 5 6 7 8
NORMAL
AGM
GEL
AGM
POWER
Ca/Ca SUPPLY
Amp
12V/70A
24V/35A
MXTS 70
START
PAUSE
MODE
INDICATION LAMPS, DISPLAYS
AND ERRORCODES
SET
A
Ah & info
V
h
1 2 3 4 5 6 7 8
NORMAL
AGM
GEL
AGM
POWER
Ca/Ca SUPPLY
Amp
12V/70A
24V/35A
MXTS 70
START
PAUSE
MODE
SETTINGS BEFORE START:
DISPLAY (V)
Indicates voltage set
Options: 12/24 Volts
DISPLAY (A)
Indicates current set
Options: 70/50/40/30/20 A in 12V setting
Options: 35/25/20/15/10 A in 24V setting
70A/35A could only be selected for Supply program.
For Normal-, Ca/Ca-, AGM/GEL- and AGM Power-program maximum
current is 50A/25A.
DISPLAY (h)
Indicates which parameter to set
Options: U/A/
DISPLAY (Ah & info)
Displays error codes
REAL TIME INDICATION DURING CHARGING:
DISPLAY (V)
Displays output voltage
DISPLAY (A)
Displays output current
DISPLAY (h)
Alt. 1. Displays total elapsed charging time (minutes/hours)
Alt. 2. Displays time elapsed until error occured
DISPLAY (Ah & info)
Alt.1. Displays total charge delivered since start (minutes/hours)
Alt.2. Displays error codes together with ERROR lamp
ERROR CODES:
E01 REVERSE POLARITY
Connect the charger according to “CONNECT THE CABLES”
E02 OVER VOLTAGE
Battery voltage to high for the chosen charging program, check
battery voltage.
E03 TIME OUT STEP 1: DESULPHATION
Restart the charger. If charging is still being interrupted the bat-
tery is seriously sulphated and may need to be replaced.
E04 TIME OUT STEP 2: SOFT START
Restart the charger. If charging is still being interrupted the battery
can not accept charge and may need to be replaced.
E05 TIME OUT STEP 5: ANALYSE
Restart the charger. If charging is still being interrupted the bat-
tery can not keep charge and may need to be replaced.
E06 BATTERY OVERHEATED
The battery is too hot to charge. The battery is damaged and
may need to be replaced.
E07 LOW BATTERY VOLTAGE IN SUPPLY PROGRAM
Battery voltage too low or too large consumers connected. Check
if 12V battery connected in 24V battery setting or disconnect
large consumers.
E08 HIGH CURRENT IN SUPPLY PROGRAM
Check if clamps are short circuited or connected reversed polarity.
E99 OVER VOLTAGE PROTECTION
If battery voltage is below 17V the ERROR lamp is lit when 24V
setting has been selected.
Alt 1. Press START/PAUSE button to charge with 12V setting.
To set the parameters for customized charging proceed with
“CHARGING” step 5 to 8
Alt 2. Press INCREASE or DECREASE button to change to
24V setting. Press START/PAUSE button to resume. To set the
parameters for customized charging proceed with “CHARGING”
step 5 to 8.
SET
A
Ah & info
V
h
1 2 3 4 5 6 7 8
NORMAL
AGM
GEL
AGM
POWER
Ca/Ca SUPPLY
Amp
12V/70A
24V/35A
MXTS 70
START
PAUSE
MODE
SET
A
Ah & info
V
h
1 2 3 4 5 6 7 8
NORMAL
AGM
GEL
AGM
POWER
Ca/Ca SUPPLY
Amp
12V/70A
24V/35A
MXTS 70
START
PAUSE
MODE
10-7012/24
E01-E99
E01
SET
A
Ah & info
V
h
1 2 3 4 5 6 7 8
NORMAL
AGM
GEL
AGM
POWER
Ca/Ca SUPPLY
Amp
12V/70A
24V/35A
MXTS 70
START
PAUSE
MODE
SET
A
Ah & info
V
h
1 2 3 4 5 6 7 8
NORMAL
AGM
GEL
AGM
POWER
Ca/Ca SUPPLY
Amp
12V/70A
24V/35A
MXTS 70
START
PAUSE
MODE
SET
A
Ah & info
V
h
1 2 3 4 5 6 7 8
NORMAL
AGM
GEL
AGM
POWER
Ca/Ca SUPPLY
Amp
12V/70A
24V/35A
MXTS 70
START
PAUSE
MODE
SET
A
Ah & info
V
h
1 2 3 4 5 6 7 8
NORMAL
AGM
GEL
AGM
POWER
Ca/Ca SUPPLY
Amp
12V/70A
24V/35A
MXTS 70
START
PAUSE
MODE
20015126D Manual MXTS70, All languages, Print file 003.indd 5 2011-10-11 13:01:28
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ctek MXTS70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ctek MXTS70 in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ctek MXTS70

Ctek MXTS70 User Manual - German - 6 pages

Ctek MXTS70 User Manual - Dutch - 6 pages

Ctek MXTS70 User Manual - French - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info