648454
4
Zoom out
Zoom in
Previous page
1/10
Next page
4
Onderstaande tabel verklaart de verschillende lampjes:
Op het net aangesloten.
Indien de modus niet juist is, schakelt de lader de laadspanning/voeding
uit.
De lader schakelt voor begin van het laden in de foutmodus, indien:
- de kabels op de verkeerde polen zijn aangesloten.
- de analysefunctie van de lader het opladen heeft onderbroken.
- de lader langer dan de maximaal toegestane tijd in de stratmodus heeft
gestaan.
Where possible, correct the cause of the fault and start the charge by
pressing the “MODE” or “RESET”-toets. De lader start opnieuw in de
laatst gebruikte modus.
1
Ontzwavelen (Desulphation)
2
Soft Start Acceptatiecontrole (Soft Start)
3
Bulk (Bulk Charge)
4
Absorptie (Absorption Charge)
5
Analysis (Analyse)
6
Recond
7
Onderhoudsoplading–oat(Float)
8
Onderhoudsoplading – pulse (Pulse)
LADEN
De lader aansluiten op accu's die in voertuigen zijn geïnstalleerd:
1. Tijdens het aanbrengen of verwijderen van de kabels op/van de accupolen mag
de voedingskabel niet in het stopcontact gestoken zijn.
2. Kijk welke pool geaard is (verbonden met het chassis). Aarde dient te zijn
aangesloten op de negatieve pool.
3. Opladen van een negatief geaarde accu: Verbind de rode kabel met de positieve
pool van de accu en de zwarte met het chassis van het voertuig. Verbind de
zwartekabelniettedichtindebuurtvandebrandstoeidingofdeaccu.
4. Opladen van een positief geaarde accu: Verbind de zwarte kabel met de
negatieve pool van de accu en de rode met het chassis van het voertuig. Verbind
derodekabelniettedichtindebuurtvandebrandstoeidingofdeaccu.
De lader aansluiten op accu's die niet in voertuigen zijn geïnstalleerd:
1. Tijdens het aanbrengen of verwijderen van de kabels op/van de accupolen mag
de voedingskabel niet in het stopcontact gestoken zijn.
2. Verbind de rode kabel met de positieve pool van de accu en de zwarte met de
negatieve pool.
Als de kabels niet correct zijn aangesloten, zorgt de beveiliging tegen omgekeerde
polariteit ervoor dat accu en lader niet worden beschadigd.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ctek Multi XS 4003 model 1035 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ctek Multi XS 4003 model 1035 in the language / languages: Dutch as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ctek Multi XS 4003 model 1035

Ctek Multi XS 4003 model 1035 User Manual - English - 12 pages

Ctek Multi XS 4003 model 1035 User Manual - German - 12 pages

Ctek Multi XS 4003 model 1035 User Manual - French - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info