803694
3
Zoom out
Zoom in
Previous page
1/6
Next page
Makes you want to drive electric
Makes
you
want
to drive
electric
DISPLAY
Om de display aan en uit te schakelen, druk 2 sec. op de toets (9).
Als u gestopt bent met etsen en er is meer dan 5 minuten geen actie meer, dan zal de display zichzelf automatisch uitschakelen.
Aan- en uitschakelen / On & O swithing
U kan kiezen uit 5 verschillende ondersteuningsniveau’s, waarbij 1 het laagste en 5 het hoogste ondersteuningsniveau is.
Door de pijl-toetsen en (7 & 8) te gebruiken kan u het gewenste ondersteuningsniveau instellen.
Als u de display uitschakeld en later terug weer inschakeld, zal de display automatisch teruggaan naar de stand die actueel was bij
het uitschakelen van de display.
To turn the display on and o, press 2 sec. the key (9).
If you stop pedaling and there is more than ve minutes, no action, then the display will turn o automatically.
1
2
You can choose from 5 dierent support levels, 1 the lowest and 5 the highest support level.
By using the and arrow key (7 & 8), you can set the desired level of support. When the display is disabled, the display will
automatically return to the mode that was current when switching o the display.
Ondersteuningsniveau / Support levels
Om het wandelen met de ets te vergemakkelijken zit er een wandelfunctie ingebouwd in de display. Druk op de pijl-toets (8)
en houdt deze ingedrukt. De Motor zal nu beginnen draaien tot een aangename (wandel)snelheid van 6 km/u. Van zodra u de
pijl-toets (8) terug loslaat, zal de motor ook stilvallen en is de wandelfunctie uitgeschakeld.
3
Wandelfunctie / Walking function
To walk with the bike a walking function is built into the display. Press the arrow key (8) and keep it pressed. The motor will start
turning into a pleasurable (walking) speed of 6 km / h. As soon as you release the arrow key (8) again, the motor will stop and
the walkingfunction is disabled.
Druk op de pijl-toets (7) en houdt deze 5 seconden ingedrukt. Het licht van de display zal nu aangaan. Als u ook de verlichting
van uw ets via de optionele verlichtingset heb aangesloten op de controller, dan zal deze nu ook gaan branden. Om de verlichting
terug uit te schakelen, drukt u terug 5 seconden op de pijl-toets (8).
4
Verlichting / Lighting
Press the arrow key (7) and hold it for 5 seconds. The displaylight will now work. If the lighting of your bike is also connected
with the controller, the light of your bike will also turn on. To turn o the lights, press again for 5 seconds on the arrow button
(8).
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crystalyte e-DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crystalyte e-DR in the language / languages: Dutch as an attachment in your email.

The manual is 1.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info