63458
16
Zoom out
Zoom in
Previous page
1/28
Next page
Safety Instructions
THE PURCHASED DEVICE IS ONLY SUITABLE FOR AN OPERATION WITH A
12V ON-BOARD ELECTRICAL SYSTEM OF A VEHICLE. Otherwise fire hazard,
risk of injury and electric shock consists.
PLEASE DO NOT MAKE ANY OPERATION OF THE SOUNDSYSTEM, WHICH
DISTRACT YOU FROM A SAFE DRIVING. Do not make any procedures, which
demand a longer attention. Perform these operations not until you have stopped the
vehicle on a safe place. Otherwise the risk of accident consists.
ADJUST THE SOUND VOLUME TO AN APPROPRIATE LEVEL, THAT YOU ARE
STILL ABLE TO HEAR EXTERIOR NOISES WHILE DRIVING. High performance
sound systems in vehicles may generate the acoustic pressure of a live concert. The
permanent listening to extrem loud music may cause the loss of your hearing abilities.
The hearing of extreme loud music while driving may derogate your cognition of
warning signals in the traffic. In the interests of the common safeness, we suggest to
drive with a lower sound volume. Otherwise the risk of accident consists.
DO NOT COVER COOLING VENTS AND HEATSINKS. Otherwise this may cause
heat accumulation in the device and fire hazard consists.
DO NOT OPEN THE DEVICE. Otherwise fire hazard, risk of injury and electric shock
consists. Also this may cause a loss of the warranty.
REPLACE FUSES ONLY WITH FUSE WITH THE SAME RATING. Otherwise fire
hazard and risk of electric shock consists.
DO NOT USE THE DEVICE ANY LONGER, IF A MALFUNCTION, WHICH
REMAINS UNREMEDIED. Attend in this case the chapter TROUBLE SHOOTING.
Otherwise risk of injury and the damage of the device consists. Commit the device to
an authorized retailer.
THE INSTALLATION OF A POWER CAPACITOR WITH SUFFICIENT CAPACITY
IS RECOMMENDED. High performance amplifiers cause high potential voltage
drops and need a high power consumption at a high volume level. To relieve the
vehicle’s on-board system, it is recommended to install a power capacitor between
the battery and the device which works as buffer. Consult your car audio retailer for
the appropriate capacity.
INTERCONNECTION AND INSTALLATION SHOULD BE ACCOMPLISHED BY
SKILLED STAFF ONLY. The interconnection and installation of this device demands
technical aptitude and experience. For your own safness, commit the interconnexion
and installation to your car audio retailer, where you have purchased the device.
DISCONNECT THE GROUND CONNECTION FROM THE VEHICLE’S BATTERY
BEFORE INSTALLATION. Before you start with the installation of the sound system,
disconnect by any means the ground supply wire from the battery, to avoid any risk of
electric shock and short circuits.
CHOOSE A APPROPRIATE LOCATION FOR THE INSTALLATION OF THE
DEVICE. Look for a appropriate location for the device, which ensures a sufficient air
circulation. The best places are spare wheel cavities, and open spaces in the trunk
area. Less suitable are storage spaces behind the side coverings or under the car
seats.
DO NOT INSTALL THE DEVICE AT LOCATIONS, WHERE IT WILL BE EXPOSED
TO HIGH HUMIDITY AND DUST. Install the device at a location, where it will be
protected from high humidity and dust. If humidity and dust attain inside the device,
malfunctions may be caused.
MOUNT THE DEVICE AND OTHER COMPONENTS OF THE SOUND SYSTEM
SUFFICIENTLY. Otherwise the device and components may get loose and act as
dangerous objects, which could cause serious harm and damages in the passenger
room.
ATTEND NOT TO DAMAGE COMPONENTS, WIRES AND CABLES OF THE
VEHICLE WHEN YOU DRILL THE MOUNTING HOLES. If you drill the mounting
holes for the installation into the vehicle’s chasis, ensure by any means, not to
damage, block or tangent the fuel pipe, the gas tank, other wires or electrical cables.
ENSURE CORRECT CONNECTION OF ALL TERMINALS. Faulty connections may
could cause fire hazard and lead to damages of the device.
DO NOT INSTALL AUDIO CABLES AND POWER SUPPLY WIRES TOGETHER.
Attend while installation not to lead the audio cables between the headunit and the
amplifier together with the power supply wires on the same side of the vehicle. The
best is a areal separated installation in the left and right cable channel of the vehicle.
Therewith a overlap of interferences on the audio signal will be avoided. This stands
also for the equipped bass-remote wire, which should be installed not together with
the power supply wires, but rather with the audio signal cables.
ENSURE THAT CABLES MAY NOT CAUGHT UP IN CLOSE-BY OBJECTS. Install
all the wires and cables like described on the following pages, therewith these may not
hinder the driver. Cables and wires which are installed close-by the steering wheel,
gear lever or the brake pedal, may caught up and cause highly dangerous situations.
DO NOT SPLICE ELECTRICAL WIRES. The electrical wires should not be bared, to
provide power supply to other devices. Otherwise the load capacity of the wire may
get overloaded. Use therefor a appropriate distribution block. Otherwise fire hazard
and risk of electric shock consists.
DO NOT USE BOLTS AND SCREW NUTS OF THE BRAKE SYSTEM AS GROUND
POINT. Never use for the installation or the ground point bolts and screw-nuts of the
brake system, steering system or other security-relevant components. Otherwise fire
hazard consists or the driving safety will be derogated.
ENSURE NOT TO BEND OR SQUEEZE CABLES AND WIRES BY SHARP
OBJECTS. Do not install cables and wires not close-by movable objects like the seat
rail or may be bended or harmed by sharp and barbed edges. If you lead a wire or
cable through the hole in a metal sheet, protect the insulation with a rubber grommet.
KEEP AWAY SMALL PARTS AND JACKS FROM CHILDREN. If objects like these
will be swallowed, a risk of serious injuries consists. Consult promtly a medical doctor,
if a child swallowed a small object.
PLEASE ATTEND THE FOLLOWING ADVICES BEFORE THE FIRST OPERATION!
16
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crunch MXB 480 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crunch MXB 480 in the language / languages: English, German as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info