168670
21
Zoom out
Zoom in
Previous page
1/32
Next page
GTX2200
21
FUNCTIONS AND OPERATIONAL CONTROLS
1
POWER/PROTECT
If the POWER LED lights up, the amplifier is ready for operation.
If the PROTECT LED lights up, a malfunction is indicated. Attend in this case the chapter TROUBLE SHOOTING.
2
4
The CH1/2 X-OVER switch selects the required operation mode of the amplifier.
Position LP: Lowpass mode (the higher frequencies will be eliminated. Adjustable by the lowpass controller.)
Position HP: Highpass mode (the higher frequencies will be eliminate. Adjustable by the highpass controller.)
Position FULL: Fullrange mode (the whole frequencies will be amplified).
5
The LOW PASS controller adjusts the cut-off point of the frequency range to above. The cut-off frequency is continuously
adjustable from 40 Hz to 150 Hz.
6
7
The HIGH PASS controller adjusts the cut-off point of the frequency range to below. The cut-off frequency is continuously
adjustable from 60 Hz to 1200 Hz (1.2 kHz).
8
The LEVEL INPUT controller adjusts the input sensitivity of the amplifier to align the audio signal from the head unit.
The input sensitivity is adjustable from 4 to 0.2 Volts.
The LINE INPUT RCA jacks must be connected with the RCA output jacks of the headunit.
9
The LINE OUT RCA jacks provide a linear fullrange audiosignal to supply an additional amplifier.
3
The BASS BOOST controller adjusts the bass boost enhancement continuously from 0dB to +12dB at 45 Hz.
The High Level Input is suitable to connect the amplifier inputs with speaker wires, if your headunit is not equipped with pre-
amplifier RCA outputs. Never use the High Level Input and the RCA inputs at the same time. This may damage the amplifier
seriously. Attend therefor the descriptions on page 28.
6 7 8 91 43 52 1
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crunch gtx4400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crunch gtx4400 in the language / languages: English, German as an attachment in your email.

The manual is 3,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info