168679
27
Zoom out
Zoom in
Previous page
1/32
Next page
25
GTX4400
27
EXAMPLE 3-Channel Mode: 1 x Stereo System & 1 x Mono Subwoofer bridged
INTERCONNECTION
Connect the RCA lineouts of the headunit with the RCA jacks LINE INPUT of the amplifier with appropriate high-value RCA cables. If a
separate SUB OUT from your headunit is available, use this for the LINE INPUT CH1/2 on the amplifier.
As alternative you can connect the loudspeaker outputs of your headunit with the HIGH LEVEL INPUT. Never use the High Level Inputs
and the RCA inputs at the same time. This may damage the amplifier seriously. Attend therefor the descriptions on page 28.
Connect the speakers with SPEAKER OUTPUT + CH 3 - and + CH 4 - and the subwoofer with the SPEAKER OUTPUT CH1/2
+ BRIDGED - of the amplifier.
Ensure by any means, that the total impedance load of all speakers per channelpair (CH3 & CH4) is not lower than 2 ohms and the total
impedance load of the subwoofer (CH1 & CH2) is not lower than 4 ohms. Too low impedance cause high temperature and will shut down
the amplifier operation.
INPUT MODE-Switch
• Select the 4CH position on the INPUT MODE switch. If there is only one RCA stereo audio cable from the headunit available, connect
the CH1/2 RCA line inputs and select the 2CH position.
CROSSOVER SETTINGS CH1/2 (SUBWOOFER )
• Attend the regarding notes on page 28.
LEVER CONTROLLER CH1/2 (SUBWOOFER )
• Attend the regarding notes on page 28.
BASS BOOST CONTROLLER CH1/2 (SUBWOOFER )
• Attend the regarding notes on page 28.
CROSSOVER SETTINGS CH3/4 (STEREO SYSTEM)
• Attend the regarding notes on page 25.
LEVER INPUT CONTROLLER CH3/4 (STEREO SYSTEM)
• Attend the regarding notes on page 25.
BASS BOOST CONTROLLER CH3/4 (STEREO SYSTEM)
• The BASS BOOST controller must be turned to 0 dB position in this interconnecting example .
FR FL or SUB OUT
Connect the stereo RCA output (FL/FR or SUB OUT and RL/RR) of the
headunit with LINE INPUTS CH1/2 and CH3/4 of the amplifier
RL RR
Speaker
left
2 – 8 Ohms
Speaker
right
2 – 8 Ohms
Switch position CH1/2 = LP and CH3/4 = HP or FULL
INPUT MODE = 3 CH
Subwoofers
4 – 8 Ohm
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crunch gtx 2200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crunch gtx 2200 in the language / languages: English, German as an attachment in your email.

The manual is 3,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info