498271
14
Zoom out
Zoom in
Previous page
1/20
Next page
Before you start with the installation of the sound system, disconnect by any means the GROUND connection
wire from the battery, to avoid any risk of electric shock and short circuits.
REFERENCE NOTE
I N S T A L L A T I O N I N S T R U C T I O N S
14
MECHANICAL INSTALLATION
Avoid any damage removing of the components of the vehicle like wires, cables, board computer, seat belts, gastank or the like.
If you want to install the GP800 under a seat, please observe not to damage the device or the wiring when you readjust the seat.
Observe also during the installation not to damage any cables of the seat heating or the seat servomotors.
Ensure that chosen location provide sufficient air circulation for the amplifier. Do not mount the device into small or sealed spaces without
air circulation near by heat dispersing parts or electrical parts of the vehicle.
The wires and cables of power supply and the audio signal must be as short as possible, to avoid any losses and interferences.
Vehicle
2
1
43
Pen or
peening
tool
There are at each corner two predrilled screw holes on the
GP800’s bottom panel. Please attach there the four supplied
mounting brackets with the eight mounting screws.
Uphold the GP800 to the chosen mounting location in the
vehicle, after you have attached the mounting brackets.
Then mark the four drill holes with a appropriate pen or
peening tool and lead through the mounting openings.
Observe that enough space remains for the installation of
the cables and ensure that they will not be bended and
have sufficient pull relief.
Put the GP800 aside and then drill the holes for the mounting
screws at the before marked locations.
Please ensure not to damage any components of the vehicle
while drilling the holes. Alternatively (depends on the material
of the surface) you can also use self-tapping screws.
Then uphold the GP800 to the chosen position and fix the
screws through the holes of the mounting brackets into the
drilled screwholes.
Ensure that the mounted GP800 is fixed tight and not get
loosen.
Mounting
screws
Fahrzeug
Drill (Ø 2 mm)
Vehicle
GP800
Mounting
screws
4x
Bottom panel
4x
4x
Fahrzeug
GP800
4x
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crunch GP 800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crunch GP 800 in the language / languages: English, German as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info