630404

Crosley C10 Manual

8
Zoom out
Zoom in
Previous page
1/10
Next page
Technical Specifications: Crosley C10
Nominal Speeds 33
1/3
& 45RPM
Speed Variance ±0.8 %
Wow and Flutter ±0.12 %
Signal to Noise -65dB
Downforce Range 10 - 30mN
Effective Tonearm Length 8.6 “ ( 218.5mm)
Overhang 0.73in
Power Consumption 2W
Outboard Power Supply 16V/500mA AC
Dimensions (W x H x D) 16.34in x 4.65in x 12.60in, with lid open 16.34in x 14.37in x 16in
Weight 12.13lbs
Technical specifications: NP8 (ORTOFON OM 5E)
Frequency response 20Hz - 20kHz Recommended load resistance 47kohms
Channel balance <2dB Amplifier connection MM -input
Channel separation >22dB Recommended tracking force 17.5mN
Output voltage 4mV Weight 0.18 oz.
Potential Incorrect Use and Fault Conditions
Crosley turntables are manufactured to the highest standards and undergo strict quality controls before leaving the
factory. Faults that may possibly occur are not necessarily due to material or production faults but can sometimes be
caused by incorrect use or unfortunate circumstances. Therefore the following list of common fault symptoms is included.
The platter doesn’t turn although the unit is switched on:
- The unit is not connected to the main power supply.
- No power at the outlet.
- Drive belt is not installed or has slipped off.
No signal through one or other channel or both channels:
- Phono input not selected at amplifier.
- Amplifier not switched on.
- Amplifier or speakers muted.
- No connection to the speakers.
- No connection between turntable and amplifier.
- Wire leads not connected the cartridge.
Strong hum on phono input:
- No ground connection from cartridge, arm, or arm cable to amplifier or ground loop.
- Turntable too close to speakers.
Distorted or inconsistent sound from one or both channels:
- Turntable is connected to wrong input of amplifier.
- Needle or cantilever damaged.
- Belt is on wrong RPM groove.
- Drive belt overstretched or dirty.
- Platter bearing without oil, dirty or damaged.
- Dust on stylus.
- MM/MC switch on preamplifier set incorrectly.
… 8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crosley C10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crosley C10 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info