772452

Croozer Travel 2006-2009 Manual

34
Zoom out
Zoom in
Previous page
1/42
Next page
34
WARNING!
When pulling the trailer behind a bicycle, your own
safety depends on the hitch being properly fitted.
Proceed therefore with special care. Never cycle
with a hitch that is inadequately attached or not
secured. If in doubt ask your specialist dealer!
On a bicycle with full axle
On a bicycle with full axle, you should fit the hitch unit
as follows:
1. Remove the left hand axle nut. If there are any
spacers or plain washers you may generally retain
these.
2. Place the hitch unit on the axle.
3. Screw the axle nut back onto the axle.
WARNING!
Beware of the rear wheel coming loose!
A thread which is too short can lead to accidental
loosening of the rear wheel and thereby to damage
and accidents.
The axle nut must be tightened on the axle thread
by at least 5 full turns, so that adequate clamping
force is ensured. If in doubt ask your specialist
dealer!
On a bicycle with quick release fasteners
On a bicycle with quick release fasteners, you should
fit the hitch unit as follows:
1. Dismantle the quick release (follow the owner’s
manual belonging to your bicycle).
2. Insert the quick release axle through the hitch unit.
3. Push the quick release through the hub axle
again. Make sure that all retaining washers and
plain washers are back in their original positions.
4. Screw the adjusting nut back onto the quick
release axle until the supporting surface of the
quick release is against the dropout.
5. Set the axle tight with the quick release lever
(Q.R. lever). You should be able to clearly feel
some resistance as you do this.
WARNING!
Beware of the rear wheel coming loose!
A quick release axle which is too short can lead to
accidental loosening of the rear wheel and thereby
to damage or accidents.
The thread of the adjusting nut of the quick release
must be tightened on the quick release axle by at
least 5 full turns, so that adequate clamping force is
ensured. If in doubt ask your specialist dealer!
If tightening of the axle is insufficient or excessive:
6. Open the Q.R. lever.
7. Turn the adjusting nut somewhat tighter against
the axle or release the adjusting nut slightly.
8. Set the axle tight with the Q.R. lever and get a
feel of the resistance as you do this. If necessary
repeat this adjustment process, until you can feel
the requisite resistance.
For bicycles where the length of the
standard quick release is insufficient, a
special quick release with longer axle is
available from your specialist dealer.
Operation
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Croozer Travel 2006-2009 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Croozer Travel 2006-2009 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info