772404
15
Zoom out
Zoom in
Previous page
1/104
Next page
15
CroozerKid14-ENG-USACAN-11-13
Initial Assembly and Unfolding the Croozer Kid Plus
ENG
If the locking mechanisms are not properly engaged, the
frame of the Croozer Kid Plus could collapse while riding,
potentially resulting in serious injuries for the passenger.
Installing the bumper and refl ectors
The Croozer Kid Plus must be properly assembled to
professional standards. Improper assembly can result in
accidents with serious injury or death.
Because packaging size is limited, the bumper, brake
shoes, and front re ectors of the Croozer Kid Plus are
shipped unattached. These parts are included in the scope
of delivery and must be properly installed.
Box contents
The box with your Croozer Kid Plus should contain the
following items:
bumper (1)
package 1: containing two short 1⁄4” Allen bolts with
washers and locknuts (2), two long 1⁄4” Allen bolts with
rubber washers (3), two front re ectors (5) with bolts
(4), and two axle hitches (7), which will be mounted to
the towing bicycle
For the installation of the re ectors, bumper, and brake
shoes, the following tools are required: a 7/16” (11mm)
open-end wrench, a Phillips screwdriver and a 5/32”
(4mm) Allen key.
Mounting the front refl ectors
When riding at night, dusk, or dawn – or when visibility is
in any way reduced – both the Croozer Kid Plus and the
towing bicycle must be equipped with active lighting sys-
tems (i.e. equipment that makes its own light.) The front
reflectors of the Croozer Kid Plus do not qualify as active
lighting equipment. If you ride at night or in conditions
of poor visibility without an appropriate lighting system,
other road users may not be able to see you, which could
result in accidents with serious injury or death.
1. Hold the re ector (5) against the mounting plate on the
front bumper, positioning it so that the pin (9) on the
back of the re ector  ts through the lower hole of the
mounting plate.
2. Insert the bolt (4) through the upper hole of the mount-
ing plate, and fasten the re ector (5) by tightening the
bolt with a Phillips screwdriver (8).
3. Repeat steps 1 and 2 to fasten the second front re ec-
tor to the other mounting plate on the bumper.
1
8
5
9
4
8
11
44
22
3 3
5 5
9
7
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Croozer Kid Plus 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Croozer Kid Plus 2014 in the language / languages: English as an attachment in your email.

The manual is 2.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Croozer Kid Plus 2014

Croozer Kid Plus 2014 User Manual - German - 48 pages

Croozer Kid Plus 2014 User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info