772405
18
Zoom out
Zoom in
Previous page
1/48
Next page
16 CroozerKid-LE19-ENG-10-18
Converting the Croozer to a Bicycle Trailer
The axle nut must engage the threads for at least five full
turns in order to ensure adequate clamping force for hold-
ing the rear wheel securely. Failure to tighten the axle nut
adequately could result in accidents with serious injury
or death. If it is not possible to tighten the axle nut five
full turns, then the quick-release skewer is too short and
must be replaced. Consult a professional bicycle me-
chanic for the appropriate parts and assistance.
5. Check that the rear wheel of the towing bicycle is
properly aligned, adjusting the position if necessary;
then close the quick-release lever or tighten the Allen
bolt, depending on the type of quick-release skewer.
Often, the closed position is indicated on the lever
by the word “CLOSE”. In this case, when the lever
side marked “CLOSE” can be seen, the lever is in the
closed position. If the axle nut has been tightened the
proper amount, you will be able to feel the resistance
increase when the lever is about halfway closed, i.e.
parallel to the axle. The adjustment is correct if you
can fully close the lever but with considerable force. In
the closed position, the lever should be parallel to the
frame, i.e. it should not stick out to the side.
6. Check whether the quick-release is securely engaged
by trying to rotate the endcap of the mechanism
(where the lever is attached) without opening the lever.
If the quick-release is loose enough to rotate, then the
clamping force is inadequate. In this case, open the
lever, and tighten the axle nut half a turn clockwise.
Repeat steps 5 and 6.
If it is impossible to push the quick-release lever into the
closed position, then open the lever, and unscrew the
axle nut half a turn anticlockwise. Repeat steps 5 and 6.
Keep in mind that the axle nut must engage the threads
of the quick-release skewer for at least ve full turns.
The axle nut must engage the threads for at least five
full turns in order to ensure adequate clamping force for
holding the rear wheel securely. Failure to tighten the
axle nut adequately could result in accidents with serious
injury or death. If it is not possible to tighten the axle nut
five full turns, then the quick-release skewer is too short
and must be replaced. An extra-long quick-release axle is
available as an accessory. Consult a professional bicycle
mechanic for the appropriate parts and assistance.
Tip: If there is not enough space for mounting the axle
hitch or if the skewer threads are too short, then you
can replace the original skewer with a Croozer Click
& Crooz® Quick Release Skewer with integrated
hitch, which is available as an accessory.
7. Finally, hold the rear wheel with both hands and try to
rock it back and forth to check that the wheel is held
securely in the dropouts.
The rear wheel of the towing bicycle must be properly
attached after the axle hitch has been installed. Riding
with an improperly installed rear wheel can result in acci-
dents with serious injury or death. Follow the instructions
and warnings given in the owner’s manual of the towing
bicycle. There are many different types of axles. When in
doubt, consult a professional bicycle mechanic.
1
Accessory
www.croozer.com
www
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Croozer Kid LE 2019 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Croozer Kid LE 2019 in the language / languages: English as an attachment in your email.

The manual is 7.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Croozer Kid LE 2019

Croozer Kid LE 2019 User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info