Manual Crofton MD 8708 (page 49 of 53) (English)

531612

Zoom out

Zoom in

1/53

Oiling the upper and under side of the machine

The places to be oiled are marked by arrows in

the figure. Before oiling, these places should be

cleaned. Put one or two drops of a good sewing

machine oil at these places.

If the machine does not run smoothly, after it

has not been operated for a longer period of

time, let the oiled machine run fast for about

one minute, with the front cover closed.

Do not forget to sew first on a small piece of

cloth so that any possible oil which may have

passed out, will be absorbed.

Oiling the machine behind the front cover

Oiling the machine

Note:

The upper and under side of the machine

should not be oiled too often.

Note:

This part of the machine should be oiled more

often than the upper and under side of the

machine..

Dismounting the back housing cover

Attention!

For this step, the machine must be switched off and unplugged.

NOTE: Your sewing machine has already

been oiled and is ready for operation.

1. Lift the presser foot lever, open the front cover

and loosen the screw (A).

The screws (A), (B) and (C) differ from each

other. They should be kept separately.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Crofton MD 8708 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Crofton MD 8708 Manual

Product: