Hemming
39
Presser foot
. . . . . . . . . . . . . . . . . . . .
hemmer foot
Program selection
. . . . . . . . . . . . . . . . . . . . . . . . . .
1
Stitch length dial
. . . . . . . . . . . . . . . . . . . . . . . .
1 - 4
Raise the presser foot (14) and the needle to
their highest position.
Remove the presser foot and attach the hemmer
foot in its place.
NOTE: Instructions for removing and
inserting the presser foot, can be found
on page 9.
1. Fold the fabric twice, in a double fold, exactly
from the edge of the fabric, with a width of
0.12 inch and over a length of 2 inch, and
crease it.
Secure the folded edge with a few stitches.
2. Pass the double fold of the edge of the fabric
into the rolling device of the hemmer and
place the fabric under the foot.
Lay the end of the thread back.
3. Lower the foot and proceed to sew slowly.
The edge of the fabric should be passed into
the rolling device in such a way that the
proper fabric width will be creased.
The start of the stitching can be supported
by gently drawing the threads laid back.
1
2
3
3 mm
