736218

Crivit VB 5626 IAN310298 Manual

24
Zoom out
Zoom in
Previous page
1/102
Next page
26
• The more trained or fitter your body is, the
slower your pulse rises and the faster it falls
back in the rest phase again. To trace your
training successes, record your values in a chart
regularly. You will get the following values
depending on when you take your pulse:
• Before training: Resting heart rate
• Immediately after finishing training (10
minutes): Stress/exercise pulse
• 1 minute after finishing training: Recovery
pulse. Use the following standard values when
checking your stress/exercise pulse:
• Pulse frequency 60%: Here you are training
in the very efficient range of 60%, ideal for
beginners.
• Pulse frequency 85%: This 85% of maximum
pulse range is suitable for athletes and
advanced persons.
• Pulse frequency 90%: The anaerobic range
of 90% of maximum pulse is only suitable for
professional athletes and short exercises.
Taking your pulse
1. Lay the index and middle fingers of your right
hand on the inside of your left wrist.
2. When you feel your pulse, count the number of
beats in 15 seconds.
3. Multiply the number of pulse beats you counted
by four.
4. The result is your pulse rate per minute.
5. Compare the pulse frequency you have
obtained this way with the valid limit values
applicable to you (see “Calculating your
exercise pulse”).
Calculating your personal maximum
heart rate
Maximum heart rate = 100%
Formula: 220 minus your age
Calculating your lower and upper
limit training heart rate
Pulse lower limit = 60%
Formula:
(220 minus your age=maximum heart rate) × 0.6
Pulse upper limit = 80%
Formula:
(220 minus your age=maximum heart
rate) × 0.85
Varying the amplitude
By varying the (parallel) position of your feet
on the plate, and thus changing the distance
between the vibrating muscles or body parts and
the centre of the body, you increase or decrease
the degree of difficulty of the exercises.
You can choose between three positions
(WALKING, JOGGING, RUNNING) (1d)
(Fig. B):
• To do this, position your feet on the item
parallel to one another, either more towards
the outside or more towards the inside. Thus the
amplitude and thereby the degree of difficulty
are either increased (feet further out on the
board) or decreased (feet further in on the
board).
• Work your way up the level of difficulty from
the inside out.
• At the beginning, start completely on the inside.
Varying the frequency
The frequency determines the number of
vibrations per second in which the item moves.
You can change the frequency from 5–16Hz
with the SPEED -/+ touch-sensitive buttons on the
display (Fig. H) or the SPEED -/+ buttons (3d/3f)
on the remote control.
Structuring your workouts
• Be sure to read the safety information before
you start your personal fitness training.
• Give yourself enough time for your fitness
training and allow for the time you will need for
warming up and recovering.
• A single workout should consist of three phases:
• Warm-up phase: 5–10 minutes of gymnastics
and stretching to prepare your muscles for the
stress.
• Vibration training: maximum of 10 minutes of
intensive but easy training.
• Cool-down phase: at least 5 minutes of
relaxation exercises.
Stopping the workout
To prevent injuries, stop exercising immediately if
you notice any of the following symptoms:
• If your muscles tense uncontrollably.
• If you become dizzy while exercising.
• If you feel pains while exercising.
GB/IE/NI
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crivit VB 5626 IAN310298 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crivit VB 5626 IAN310298 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info