Manual Crivit VB 5626 IAN310298 (page 19 of 102) (English, German, Dutch, French)

736218

Zoom out

Zoom in

1/102

Battery warning notices!

• Remove the batteries when they are

flat, or if the item is not in use for an

extended period.

• Do not use different types or

brands of battery, or new and used

batteries together, or batteries with

different capacities as these can

leak and cause damage.

• Take note of the correct polarity

(+/-) when inserting the batteries.

• Replace all batteries at the same

time and dispose of the old batter-

ies as prescribed.

• Warning! Batteries may not be

charged or reactivated by any oth-

er means, taken apart, thrown into

fire or short-circuited.

• Always keep batteries out of reach

of children.

• Do not use rechargeable batteries!

• Cleaning and maintenance may

not be carried out by children with-

out supervision.

• Clean the battery and device con-

tacts as needed and before insert-

ing.

• Do not expose the batteries to

extreme conditions (e.g. radiators

or direct sunlight). Otherwise there

is an increased risk of leakage.

• Batteries can be life-threatening if

swallowed. Therefore, always store

them out of reach of small children.

Medical attention must be sought

immediately if a battery has been

swallowed.

Danger!

• Handle damaged or leaking

batteries with extreme caution and

dispose of them properly as soon

as possible. Wear gloves when

doing so.

• If you come into contact with bat-

tery acid, wash the affected area

with soap and water. If battery acid

gets in your eye, rinse it with water

and seek medical attention immedi-

ately!

• The connection terminals must not

be short-circuited.

Using the item

How the vibration board works

The item works according to the rocking or side-

alternating principle and describes a vertical

movement, by which the right and left side of the

vibration plate move up and down in opposite

directions, similar to a seesaw.

You can set the vibration frequency for your

workout yourself or select from one of the ﬁve

pre-set programmes. The recommended training

area is between 5 and 16Hz. Start low and only

increase the intensity if you still feel comfortable.

Vibration level

The item has over 20 vibration levels which you

can use to set the desired vibration frequency

(5–16Hz).

Display (Fig. H)

During the workout, the current training values

are continuously shown on the display plus a

corresponding display symbol:

• Time of workout remaining (display symbol:

TIME)

GB/IE/NI

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Crivit VB 5626 IAN310298 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Crivit VB 5626 IAN310298 Manual

Product: