735858

Crivit SK 6934 IAN 322297 1901 Manual

7
Zoom out
Zoom in
Previous page
1/26
Next page
9GB/IE
• When using the product skill is required in
order to avoid falls and crashes that might
lead to injury to the rider or to other people.
Assembly
The product is delivered folded as in transport.
Proceed as follows to get ready to slide:
Assembling the runners (fig. B)
1. Use the Allen keys (3) to loosen screws (1m)
and (1n) on the front axle.
2. Insert the runner (2) between the fork.
Important: Make sure that the boreholes are
at equal height.
3. Fix the runner (2) in place using screws (1m)
and (1n).
Note: You must use the Allen keys to lock the
screws (1m) and (1n) tightly in place.
4. Repeat the same sequence for the rear runner.
Unfolding the scooter (fig. C)
1. Disengage the lower quick-release lock (1a).
2. Pull the lever (1b) upwards and move the
steering column (1c) forwards until it snaps
into place.
3. Secure the folding mechanism by engaging
the lower quick-release lock (1a).
Note: If the quick-release lock is too loose, you
can set the knurled screw on the back of the lock
manually.
Assembling the handles (fig. D)
1. Free the handles (1d) from their brackets (1e).
2. Press the locking buttons (1f) on the handles
(1d) and push the handles (1d) on both sides
into the T-tube (1g) on the steering column.
The locking buttons (1f) must snap audibly
into the boreholes provided.
Setting the steering column height
(fig. E)
The steering column can be adjusted to
three different heights.
The product may only be used when the
locking button has snapped into one of
the three boreholes provided and the
steering column has subsequently been
secured with the quick-release lock.
1. Disengage the quick-release lock (1i) on the
steering column (1c).
2. Pull the steering column (1c) upwards until the
locking button (1i) snaps into one of the three
boreholes (1k).
3. Secure the steering column (1c) by engaging
the quick-release lock (1i).
Note: If the quick-release lock is too loose, you
can set the knurled screw on the back of the lock
manually.
Steering bearing (fig. F)
The steering bearing is pre-set upon delivery of
the product. If after a period of time the handle-
bar has too much play or becomes too stiff, have
the steering bearing adjusted by a specialist
dealer or a bicycle shop.
Preparing the product for
transportation (fig. G)
1. Disengage the quick-release lock (1i) on the
steering column (1c).
2. Push the steering column (1c) all the way
down.
3. Secure the steering column (1c) by engaging
the quick-release lock.
4. Press the locking buttons on the handles (1d)
and pull the handles (1b) out of the T-tube
(1g) and fasten them to the brackets (1e).
5. Disengage the lower quick-release lock (1a)
and pull the lever (1b) upwards.
6. Push down the steering column (1c) in the
direction of the board (1l) until it snaps into
place.
7. Engage the lower quick-release lock (1a).
Use
Riding the scooter
Stand on the board (1l) with one leg and push
off regularly with the other leg to gain momen-
tum. The scooter can be controlled by the rider’s
movements, by shifting weight or by a combina-
tion of both actions.
Storage, cleaning
When not in use, always store the product clean
and dry at room temperature.
Clean only with water and wipe dry afterwards
with a cloth.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crivit SK 6934 IAN 322297 1901 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crivit SK 6934 IAN 322297 1901 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info