Manual Crivit QUADCOPTER - IAN 306200 (page 13 of 70) (English, German, Dutch, Danish, French)

779281

Zoom out

Zoom in

1/70

15GB/IE/NI

Charging the battery

1. Remove the battery (9) from the battery com-

partment (1g) of the quadrocopter (1) (Fig.E).

WARNING:Never charge the battery

(9) while it is still mounted to the quadro-

copter (1). It could catch fire and destroy

the item.

Do not remove the outer case of the battery (9).

This protects the battery (9).

2. Connect the end of the cable (6a) of the USB

charging cable (6) to the battery connector (9a)

of the battery (9) (Fig.F).

3. The battery charge indicator of the USB charg-

ing cable (6) is automatically activated (Fig.F).

4. Plug the other end (6b) of the USB charging

cable (6) into a USB port on a powered-on

computer or charging station with a USB port

(Fig.F).

5. The charge indicator light on the cable end (6b)

turns itself off.

NOTE: Charging takes

about 110-120 minutes.

6. After charging, disconnect the battery connector

(9a) from the end (6a) of the USB charging

cable (6) and unplug the end (6b) of the USB

charging cable (6) from the USB port.

7. Insert the rechargeable battery (9) into the

battery slot (1g) correctly (see “Inserting the

rechargeable battery”).

Under-voltage warning

The lights (1h) start flashing when the rechargeable

battery (9) is almost empty. Land the quadrocop-

ter(1) as soon as you notice this.

Inserting the battery

1. Open the battery compartment lid (1i) of the

battery compartment (1g) and insert the bat-

tery(9).

2. Connect the battery connection (9a) (9b) with

the quadrocopter (1).

3. Close the battery compartment (1g) completely.

Removing the battery (Fig.F)

Open the lid (1i) of the battery compartment (1g)

and insert the battery (9).

NOTE: If the battery connector (9a) (9b)

is connected to the quadrocopter (1), you

must disconnect this before removing the

rechargeable battery (9) from the quadro-

copter (1).

Setting the camera (Fig.G)

The camera (1e) is firmly attached under the quad-

rocopter (1). Turn the camera wheel-buttons up or

down to set the camera lens position.

NOTE: The camera (1e) has a small LED

indicating status. For good visibility, the

camera functions are also shown via the

quadcopter (1) LEDs.

Transferring data (Fig.H)

Photographs and film are stored on the micro-SD

card (10). The data is transferred to a computer

or device with a USB port (such as a television) as

follows:

1. The Micro-SD card (10) is positioned inside

the camera (1e). Press down on the micro-SD

card(10) and remove it from the port (1e).

2. Slide the micro-SD card (10) fully into the mi-

cro-SD card USB stick (7), as shown in Figure H.

NOTE: Take care to insert the micro-SD

card (10) properly. It needs to be almost

completely inside the micro-SD card USB

stick (7).

3. Insert the micro-SD card USB stick (7) into the

USB port of a computer.

4. The computer will recognise the micro-SD card

USB stick (7) and you will then be able to copy

the data to the computer.

Suitable flight environment

For ideal flight conditions, the following criteria

should be met:

• Calm wind conditions, up to force 3 winds.

• Check local weather report for current weather

conditions and forecast changes.

• People must remain a safe distance (5m) from

the quadrocopter when it is taking off.

• Be aware of obstacles before flying, and move

them out of the way if possible, or maintain a

safe distance from them (> 5m).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Crivit QUADCOPTER - IAN 306200 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 2.81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Crivit QUADCOPTER - IAN 306200 Manual

Product: