750307
52
Zoom out
Zoom in
Previous page
1/66
Next page
54
The external connection cable from this
transformer cannot be substituted; if the
cable is damaged, the transformer will
have to be scrapped.
Assembly instructions
Assembly of the dartboard
(Illustration B, C)
Select a suitable position with approx. 3m
free space around it.
The ‘scratch line’ must be at a distance of
2.37m from the dartboard. Fix the dart
board to the wall so that the centre of the
Bullseye is at a height of 1.73m above
the ground.
Using the enclosed drilling template, mark
the respective drill holes with a pencil. The
markings “+”indicate the direction to
mount the dartboard in. The markings
“O” indicate openings on the dartboard
for permanent wall mounting. Mount the
dartboard using either the mounting de-
vice (3 screws) or permanent wall moun-
ting (4 screws). The cross at the centre of
the drill template indicates the position of
the bullseye on the dartboard. Then
mount the dartboard using the included
screws and wall plugs.
Assembly of the darts
(Illustration D)
Screw the tip and shaft together as indica-
ted into the grip and insert the unfolded
flight into the cross-slots.
Avoiding material damage!
Use exclusively proper original replace-
ment tips, in order to avoid the darts
ricocheting off the dartboard. We strongly
recommend you do not use long tips for
electronic dartboards. They quickly buck-
le and easily break (Removing broken-off
tips from the dartboard – Trouble-
shooting, page 50).
Do not allow the item to be exposed to
extreme weather conditions and tempera-
tures.
Protect the item from moisture and damp-
ness. The electronics could be damaged.
Safety instructions power
adapter
ATTENTION!
Important information for use of the
adapter!
Note: The device gets warm during
normal use.
Only use the adapter in connection with
the Dartboard DS-1532.
Only use the supplied adapter!
Only use original spare parts in the event
of a defect!
First unplug the adapter from the wall
socket before disconnecting the adapter
from the dartboard.
The adapter is suitable for indoor use
only. Keep away from moisture.
If the housing or the power lead of the
device is damaged, discontinue using the
adapter.
Disconnect the device from the mains if
not used over a longer period of time.
The mains output line is not allowed to be
short-circuited.
GB
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crivit IAN 91561 DS 1532 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crivit IAN 91561 DS 1532 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info