634197
26
Zoom out
Zoom in
Previous page
1/40
Next page
27
Assembly
We recommend watching the film on the enclosed DVD before or during
assembly. The film demonstrates assembly in a simple and easy to follow
manner.
A second person is required during assembly to help in handling
the heavy equipment. Before assembling the equipment, verify you will
have adequate space, and protect the floor so as not to damage it
during assembly.
The equipment is heavy. Always keep your back straight when
lifting the equipment.
Attaching the feet
Assembly requires the two feet (12) and (38), four screws (37),
four washers (36) and the Allen key (Fig. 1a).
Begin with the front foot (38) with the transport rollers.
Please note the label (front) – this will help to insert the foot in the correct
direction. The transport rollers must face forward. To secure the foot have
the second person raise the front of the base frame. Secure the front foot
with two screws (37) and two washers (36) to the base body using the
Allen key (Fig. 1b).
Now assemble the rear foot (12) with the knurled screws for height
adjustment in the same way (Fig. 1c).
The knurled screws are later used to even out uneven floor surfaces.
Assembling the handlebar post
For this step you need the handlebar post (14), the handlebar post cover
(21) and the Allen key (Fig. 2a).
1b
1c
1a
2a
GB
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crivit IAN 74884 - Ergometer Bike at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crivit IAN 74884 - Ergometer Bike in the language / languages: English, German as an attachment in your email.

The manual is 4,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info