Manual Crivit IAN 311336 DL 6148 (page 9 of 26) (English, German, Dutch, French, Polish, Swedish)

750301

Zoom out

Zoom in

1/26

11GB/IE

Congratulations!

With your purchase you have decided on a

high-quality product. Get to know the product

before you start to use it.

Carefully read the following

instructions for use.

Use the product only as described and only

for the given areas of application. Keep these

instructions safe. When passing the product

on to a third party, always make sure that the

documentation is included.

Package contents

1 x instructions for use

1 x double-cylinder foot pump

2 x adapter for inﬂatable items (5)

1 x adapter for balls (6)

Technical data

Rated pressure: 5 bar/73 PSI

Dimensions: approx. 285 x 143 x 88mm

(L x W x H)

Date of manufacture (month/year):

01/2019

Intended use

This item is suitable for private use for inﬂating

all common bicycle tires with Schrader valves,

Dunlop valves and Presta valves. It may also be

used for inﬂating balls, air mattresses and similar

inﬂatable items.

Safety information

Risk of injury!

• This product is not suitable for use by children

or people with physical and/or mental impair-

ments due to the item’s high operating forces

and their associated risks.

• Check the item and especially the connec-

tion points for damage or wear before each

use. Defective items may no longer be used

and must be disposed of as they cannot be

repaired.

• Risk of burns! During prolonged pumping,

the pump plunger and the pump cylinder can

become hot due to the friction. The pump may

only be held by the foot pad after using it.

• There must be a cooling down phase of 2

minutes after pumping 80 times. Inﬂate an

item only up to the maximum pressure spec-

iﬁed by the manufacturer. In case of bicycle

tyres, this is usually found on the tyre wall.

• While you are inﬂating, pay attention to the

pressure reading on the pump and to the item

being inﬂated. There is a risk of an explosion

if there is excess pressure!

• A calibrated pressure gauge must be used to

monitor the pressure while inﬂating.

• Crushing hazard!

For foot operation only.

Not suitable for use by

hand.

Initial setup

Warning! The item is pre-tensioned with

a spring and rebounds quickly when

opening it.

Place the item on the ﬂoor. Press the foot pad (1)

down with one hand and unlock the retaining

bracket (2) with the other hand (Fig. B).

Proceed in the reverse order to lock the pump.

Use

The item may only be used on a level, stable

surface. There should be no kinks in the pump

hose (3). Press the foot pad evenly and not too

quickly to inﬂate an object. Put pressure on the

middle of the foot pad to prevent tilting.

Note: There is a red mark (9) in the shape of

an arrow on the pressure gauge display. Using

this red mark, you can set the desired maximum

pressure as a visual marking.

To do this, turn the housing of the pressure

gauge left or right (Fig. C).

Please note that the adjusted display only serves

as a guide and does not aﬀect the pumping.

Inﬂating balls (Fig. D)

Put the adapter for balls (6) into the large open-

ing (8) on the dual pump head.

Flip the clamping lever (4) up to lock the adapt-

er in place. Then insert the adapter into the ball.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Crivit IAN 311336 DL 6148 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 2,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Crivit IAN 311336 DL 6148 Manual

Product: