735868

Crivit HG04765 IAN 313762 Manual

10
Zoom out
Zoom in
Previous page
1/35
Next page
10 GB/IE
assembled incorrectly. Damaged parts can
effect safety and function.
Select a piece of land that is as flat and firm as
possible to assemble your tent.
The intactness of all connection points and the
guy ropes should be checked regularly, as should
the firmness of the tent pegs in the ground.
Do not use any insect spray in or on the tent.
Small leaks on the seams can be repaired with
a seam spray and impregnation spray can be
used for the tent skin.
CAUTION! DANGER OF POISONING
AND DAMAGE TO PROPERTY! Do not light
any fires within the product and keep it away
from sources of heat.
You should also familiarize yourself with the
local fire protection regulations (e.g. camping
site, tent pitch).
WARNING! DANGER OF SUFFOCATION!
If the inside of the tent is not adequately venti-
lated, there is a risk of suffocation.
Make sure that the vents on the side of the inner
tent are not covered at any time.
Do not leave children unattended in the tent.
Fire precautions
Camp safely. Follow these commonsense
rules:
Do not place hot appliances near the walls, roof
or curtains.
Always observe the safety instructions for these
appliances.
Never allow children to play near hot a
ppliances.
K
eep exits clear. Do not block the exit with ob
jects.
Make sure you know the fire precaution arrange-
ments on the site.
Tent assembly
Inside the carrying bag there is a label with
a QR-code. If the QR code is scanned you will
receive details about how to pitch the product.
Please ensure that the product is only assembled
by people with the appropriate skills.
Note: The polyester material of the outer tent
consists of water-repellent material.
It is possible that during the first rainfall the outer
tent will not be completely watertight. However,
the threads of the tent will contract when exposed
to water so that after a short time the outer tent
will become watertight.
Outer tent + Inner tent
Note: The outer tent fabric has an UPF rating of 30.
The inner tent and the mesh do not show a UV pro-
tection. UV radiation can pass through the open door
of outer tent. Protect your skin.
Illustration A:
1. Place the outer tent
1
flat on the ground. The
tunnels for the poles
3
must be facing upwards.
2. Run the two poles
3
with into the two tunnel
guides on the outer tent
1
one after another
and slide them through to the end.
Illustration B:
3. Push the pole
3
of the awning through the
tunnel guide on the awning so that it extends
evenly on both sides of the tunnel guide.
4. Set the outer tent
1
up and fix the poles
3
to the plastic cap of the floor fastenings of the
outer tent.
Illustration C:
5. Run the pole
4
with the metal end forward
into the fabric hook guides on the outer
tent
1
top to the end and fix the
pole
4
to the plastic
cap of the roof on both side
Illustration D:
6. Fix one side of the tent in the ground with the
tent pegs
5
. Then take hold of the other end
of the tent and pull it apart in such a way that
the tent is taut.
Illustration E:
7. Attach all the fastening hooks of inner tent
2
to
the plastic loops in outer tent
1
and plug the
two plastic buckle on the bottom of the outer
tent
1
.
Note: If using the outer tent as a shelter without
the inner tent, skip this step 7.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crivit HG04765 IAN 313762 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crivit HG04765 IAN 313762 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info