735690

Crivit HG03361A Manual

12
Zoom out
Zoom in
Previous page
1/36
Next page
10
GB/IE
Do not use any insect spray in or on the tent.
Small leaks on the seams can be repaired
with a seam spray and impregnation spray
can be used for the tent skin.
m CAUTION! DANGER OF POISONING
AND DAMAGE TO PROPERTY! Do not
light any fires within the product and keep it
away from sources of heat.
You should also familiarize yourself with the
local fire protection regulations (e.g. camping
site, tent pitch).
m WARNING! DANGER OF
SUFFOCATION! If the inside of the tent is
not adequately ventilated, there is a risk of
suffocation.
Make sure that the vents on the side of the
inner tent are not covered at any time.
Do not leave children unattended in the tent.
The logo on the inner tent
7
indicates it
is an access slot for USB cables (for LED
lighting or phone charging).
WARNING! Do not use high voltage
appliances or hot appliances in the
tent, as this may cause fire or electric
shock.
Fire precautions
Camp safely. Follow these
commonsense rules:
Do not place hot appliances near the walls,
roof or curtains.
Always observe the safety instructions for
these appliances.
Never allow children to play near hot
appliances.
Keep exits clear. Do not block the exit with
objects.
Make sure you know the fire precaution
arrangements on the site.
Tent assembly
Inside the carrying bag there is a label with
a QR-code. If the QR code is scanned you
will receive details about how to pitch the
product.
Please ensure that the product is only
assembled by people with the appropriate
skills.
Note: The polyester material of the tent
consists of water-repellent material.
It is possible that during the first rainfall
the tent will not be completely watertight.
However, the threads of the tent will contract
when exposed to water so that after a short
time the tent will become watertight.
Erect the product in accordance with the
illustrations A to I.
Illustration A and B:
1. Place the outer tent
1
flat on the ground.
The tunnels for the poles
2
3
must be
facing upwards.
2. Run the two fiberglass poles
2
with the
plastic end forward into the two tunnel
guides on the outer tent one after another
and slide them through to the end.
3. Push the fiberglass pole
3
of the awning
through the tunnel guide on the awning so
that it extends evenly on both sides of the
tunnel guide.
Illustration C and D:
4. Set the tent
1
up and fix the poles
2
,
3
to the metal pins of the floor fastenings.
Illustration E:
5. Fix one side of the tent in the ground with
the tent pegs
5
. Then take hold of the other
end of the tent and pull it apart in such a
way that the tent is taut.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crivit HG03361A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crivit HG03361A in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info