736568
13
Zoom out
Zoom in
Previous page
1/57
Next page
13 GB/IE
Getting started
Using the stopwatch with the
pedometer (the device must be in
count mode):
j Press the FUNC button
6
3 times to get
into stopwatch mode. The word Stop-
watch
28
will light up in the LC display.
j Press the MODE button
3
to start the
stopwatch.
j Press the FUNC button
6
to switch to
count mode. The pedometer is active.
The stopwatch continues running in the
background.
j Press the FUNC button
6
3 times to
return to stopwatch mode.
j Press the MODE button
3
again to stop
the stopwatch.
j Press the CLEAR button
5
to set the stop-
watch to 0.
Note: The stopwatch can only be set to
0 in stopwatch mode.
j Press the FUNC button
6
to return to
count mode.
Q
Alarm function
j Set the required alarm time (see “Setting
parameters”).
Note: The set alarm is activated every
day. The alarm signal rings for approx.
1 minute.
j Press the FUNC
6
, CLEAR
5
, SET
2
or
MODE button
3
to deactivate the audible
signal.
Q
Using the panic alarm
j The alarm is triggered when the panic
alarm plug
1
is pulled out of the device.
j Pull out the panic alarm plug
1
on the
wrist strap to trigger the panic alarm.
j Insert the panic alarm plug
1
back into
the device to switch off the panic alarm.
Note: Four new LR44 batteries will sound
the panic alarm for about five minutes. We
recommend that you test the panic alarm
briefly when you wish to use the pedometer.
Replace the four LR44 batteries without delay
if the low battery state indicator
15
illuminates.
Q
Restore factory settings
j If the equipment is exposed to a strong
electro-magnetic high-frequency field, or
if there is electro-static discharge, this may
lead to malfunctions. If malfunctions do
occur, for example the buttons do not
reach or the display is shown incorrectly,
press the RESET button
12
to reset the
equipment to the factory defaults. Use a
thin, pointed object to do this. The mal-
functions should then be eliminated.
IMPORTANT! Please note that this will
delete all data. It will then be necessary
to reset all the parameters.
Q
Changing the batteries
The device takes two different battery types.
Note: You should replace the smaller batteries
(type LR44) immediately when the low battery
state indicator
15
illuminates. If the smaller
batteries (type LR44) become exhausted or
low in charge, then the panic alarm and
pedometer functions cannot be used. Do not
use the pedometer without the larger battery
(CR2032) in place or with a discharged larger
battery (CR2032). The data storage function
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crivit H14347 IAN 56018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crivit H14347 IAN 56018 in the language / languages: English, German, Danish as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Crivit H14347 IAN 56018

Crivit H14347 IAN 56018 User Manual - German, Dutch, French, Italian - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info