736568
9
Zoom out
Zoom in
Previous page
1/57
Next page
9 GB/IE
Getting started
function. Otherwise the functions of the
pedometer cannot be used properly.
Note: After you have set all the parameters
before using it for the first time, you can
change the parameters at any time. The only
thing you cannot change at a later date is the
unit of measurement (metric or US system). If
you wish to change the unit of measurement,
you will have to remove all the batteries
10
,
11
from the battery compartment
13
or press the
RESET button
12
. This process resets the preset
values again.
Q
Hold mode / Count mode
When you start the device, the pedometer is
automatically in count mode.
Note: In hold mode the measuring func-
tions of the pedometer are disabled.
j Press and hold the MODE button
3
for
about 3 seconds. An acoustic signal will
sound. The display
will flash alter-
nately with the number of the steps.
j Press and hold the MODE button
3
for
approx. 3 seconds to enter count
mode. You will hear a signal.
dis-
appears.
Q
Setting parameters
j When you start to operate the device for
the first time or switch the device to hold
mode (see “Hold mode/counting mode”),
you can set or change various parameters.
j To do so, press the SET button
2
, to get
to set mode. The word “SET” will light
up in the LC display.
j The indicators kg, cm, km or lb, inch, mile
16
flash. Press the buttons MODE
3
or CLEAR
5
to set the desired unit of
measurement (metric or US system).
j Confirm your entry by pressing the SET
button
2
. The word STRIDE will appear
in the function bar
14
. The cm symbol
16
and the preset value 60 cm / 25 inch flash
in the LC display. Press the buttons MODE
3
or CLEAR
5
in order to set the de-
sired length of your stride.
Note: You can specify a stride length of
between 30 to 200 cm / 10 to 80 inch.
Tip: Press the MODE
3
or CLEAR
5
button for about 3 seconds. This will speed
up the process of setting the values. You
can use this fast way of setting the param-
eters for the setting procedures that follow.
j Confirm the entry by pressing the SET
button
2
. The word WEIGHT will appear
in the functionbar
14
. The kg symbol
16
and the preset value 60 kg / 120 lb flash
in the LC display. Press the buttons MODE
3
or CLEAR
5
to set the desired weight.
Note: You can specify a weight of
between 30 to 200 kg / 60 to 400 lb.
j Confirm the entry by pressing the SET
button
2
. The word HEIGHT will appear
in the function bar
14
. The preset value
flashes in the LC Display. Press the MODE
3
or CLEAR
5
button to enter the desired
value.
Note: A value between 60 and 250 cm /
20 and 100 inch can be entered.
j Confirm your settings by pressing the
SET button
2
. The LC display shows the
AGE
29
indicator and the number 18 as
the preset value. Press the MODE
3
or
CLEAR
5
button to enter the desired age.
Note: Any age between 5 and 99 years
can be entered.
j Confirm the entry by pressing the SET
button
2
. The words MAN or WOMAN
will light up. Press the buttons MODE
3
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crivit H14347 IAN 56018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crivit H14347 IAN 56018 in the language / languages: English, German, Danish as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Crivit H14347 IAN 56018

Crivit H14347 IAN 56018 User Manual - German, Dutch, French, Italian - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info