736624
42
Zoom out
Zoom in
Previous page
1/48
Next page
12V Electric Cool Bag Crivit CKT 12 A2
40 - English
Place the connection cable in the vehicle so that the driver is not impeded as there will be a
danger of accidents otherwise.
Secure the cool bag in the vehicle to prevent uncontrolled movements so that it cannot pose a
risk for the vehicle occupants in the event of an accident or during a hard braking manoeuvre.
Store the cool bag in the boot of the vehicle for safety reasons.
Switching the cool bag on or off
You must make sure that your vehicle has a 12 V car power supply. The cool bag must not be
used with a 24 V car power supply.
Unwind the connection cable completely. Now insert the cigarette lighter plug [5] into a suitable
cigarette lighter socket of your vehicle. The cool bag is now switched on and begins to cool. The
LED on the cigarette lighter plug [5] lights up green in operating mode. To switch off the cool bag,
disconnect the cigarette lighter plug [5] from the cigarette lighter socket of your vehicle.
Since the cigarette lighter socket of some vehicles supplies power even if the ignition is
switched off, you should disconnect the cigarette lighter plug [5] from the cigarette lighter
socket of your vehicle when leaving the vehicle. Otherwise, the battery of your car could run
down to such an extent that you cannot start the car engine.
Energy saving tips
Do not expose the cool bag to direct sunlight.
Only use previously cooled food and drink.
Do not open the cool bag for longer than necessary and close the bag cover completely with
the drawstring [2].
Ensure that air can circulate between the items to be cooled. You can fill the cool bag at most,
for example, with six upright 1L bottles or 18 upright 0.33L beverage cans (67mm in diameter
x 115mm in height).
Using corkscrew/bottle opener
You will find a corkscrew/bottle opener [8] in the pocket with Velcro fastener [9] in the front lined
outer pocket [4]. The corkscrew/bottle opener [8] is attached with a snap hook to a strap so that it
cannot be lost. You can detach the corkscrew/bottle opener [8] from the snap hook in order to use
it. Do not use the corkscrew/bottle opener [8] as a tool. The corkscrew/bottle opener [8] is to be
used solely for opening bottles with corks or crown caps. Any other use is not as intended. When
you open a corked bottle, you can use the knife of the corkscrew/bottle opener [8] to cut a capsule
that may be present and then remove it. To use the knife that is intended solely for this purpose, fold
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crivit CKT 12A2092014 IAN 103862 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crivit CKT 12A2092014 IAN 103862 in the language / languages: French, Italian as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Crivit CKT 12A2092014 IAN 103862

Crivit CKT 12A2092014 IAN 103862 User Manual - English, German, Dutch - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info