736521
6
Zoom out
Zoom in
Previous page
1/28
Next page
English
4 12/2009 © Targa GmbH
First time usage
1. Open the battery compartment . Insert 3 AAA batteries, mak-
ing sure they are aligned with the correct poles. Close the com-
partment.
2. Connect the jack to the headphone jack of your audio device,
activate the music output on the audio device and set it to a low
volume.
3. Slide the switch to “ON” (LED lights up) and set the de-
sired volume on the audio device.
4. Store the audio device in the device compartment and close
the zip of the bike speaker.
The speaker cable may not be folded or kinked during this. The
audio device must loosely fit into the device compartment. Oth-
erwise operation is not permissible.
5. Fasten the bike speaker to the bike’s handlebars with its Velcro
fastening. Always use both fastenings!
Troubleshooting: If the LED does not light up, check whether the switch is set to “On”. If this
is the case, check the position of the inserted batteries (polarity) or change the batteries. If the LED
lights up, first check the function of your audio device with the original headphones, then with
the speaker cable.
Operation and turning the device off
Danger: During operation, ensure that the bike speaker does not impair any functions on
the bicycle that are relevant to road safety (lights, brakes, bell etc.) and that the bike speaker is
not a hindrance while riding the bicycle (no limitations to steering angle, brakes and bell easily
accessible etc.).
Danger: Never operate the bike speaker and the audio device while riding the bicycle!
When opening the housing, make sure that the audio device does not fall out!
Switch the speaker off (switch to “OFF“) when you are not using it.
If you will not be using the bike speaker for an extended period of time, remove the batteries
and store the device in a dry place.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crivit BS 210 IAN 45640 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crivit BS 210 IAN 45640 in the language / languages: English, Danish, Finnish as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Crivit BS 210 IAN 45640

Crivit BS 210 IAN 45640 User Manual - German, Dutch, French, Italian - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info