736875
17
Zoom out
Zoom in
Previous page
1/125
Next page
17 GB/IE/CY
… / Before use / Start-up / Replacing the 12 V fuse / Troubleshooting
Securing the cool box lid
with the handle
Fold the handle
1
forward (in the direction of
the “LOCK“ mark) to close the cool box lid
2
tightly (see Fig. C1).
Fold the carrying handle
1
up when transport-
ing the cool box. The cool box lid
2
is closed
tightly (see Fig. C2).
Fold the handle to the back (in the direction of
the “OPEN“ mark) to open the cool box lid
2
,
(see Fig. C3).
Tips for best cooling output
and energy savings
The cool box works in ambient temperatures between
-10 °C and 43 °C with a relative humidity of 90 %.
The minimum temperature may not be reached at an
external temperature of over 30 °C.
Select a well ventilated location protected from
the sun.
Only place pre-cooled items in the electric cool
box.
Do not open the electric cool box longer than
necessary.
Do not leave the lid
2
open longer than nec-
essary.
Be sure not to overfill the electric cool box and
air can circulate sufficiently between the items
being cooled.
Before use
Place the electric cool box on a level surface.
Clean the electric cool box with a damp cloth.
Start-up
Note: When powered by car battery be sure
the car engine is running. Operating the electric
cool box with the engine off may drain your car
battery and you will be unable to start the engin
e.
Plug the DC connecting cable on the electric
cool box into the cigarette lighter socket in your
car, boat or caravan.
Close the electric cool box tightly using the
electric lid
2
, the product will start cooling.
After a short while you will be verify the electric
cool box is operating correctly by placing your
hand up to the aluminium vent inside the lid.
Note: The plug does not have a status indicator.
Be sure not to accidentally leave the cool box
on as this will drain the car battery.
Remove the plug from the 12 V socket of your
car, boat or caravan to switch off the cool box.
Replacing the 12 V fuse
Also see Figure B.
To replace the fuse
7
remove the cap
3
,
loosen the screw
4
on the plug and disassem-
ble the plug.
Remove the fuse
7
.
Note: If the thin metal connection between the
two metal tips is broken, the fuse
7
is defective
and must be replaced.
Insert the new fuse
7
with care.
Reassemble the plug and screw in the screw
4
.
The plug is now ready for operation.
Troubleshooting
In the event the electric cool box malfunctions,
unplug and perform the following tests:
Is the connection cable correctly connected
and does the cigarette lighter of your vehicle
function properly?
Did you set up the electric cool box so air can
circulate freely to ensure the cooling unit is ven-
tilated?
Is the fuse
7
inside the plug on the 12 V con-
necting cable defective?
A fuse on the socket in your car, caravan or
boat may be defective. Most vehicles require
the ignition to be on to supply electricity.
Is the electric cool box level?
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crivit B450 IAN 281564 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crivit B450 IAN 281564 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info