Manual Crivit AS 5937 IAN 307525 (page 12 of 32) (English, German, Dutch, French, Polish)

735877

Zoom out

Zoom in

1/32

12 GB/IE

Dispose of the products and the

packaging in an environmentally friendly

manner.

The recycling code is used to identify

various materials for recycling.

The code consists of the recycling symbol

– which is meant to represent the recycling cycle

– and a number which identiﬁes the material.

Notes on the guarantee and

service handling

The product was produced with great care and

under constant supervision. You receive a three-

year warranty for this product from the date of

purchase. Please retain your receipt.

The warranty applies only to material and

workmanship and does not apply to misuse or

improper handling. Your statutory rights, espe-

cially the warranty rights, are not aﬀected by this

warranty.

With regard to complaints, please contact the

following service hotline or contact us by e-mail.

Our service employees will advise as to the

subsequent procedure as quickly as possible.

We will be personally available to discuss the

situation with you.

Any repairs under the warranty, statutory gua-

rantees or through goodwill do not extend the

warranty period. This also applies to replaced

and repaired parts. Repairs after the warranty

are subject to a charge.

IAN: 307525

Service Great Britain

Tel.: 0800 404 7657

E-Mail: deltasport@lidl.co.uk

Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (oﬀ peak))

E-Mail: deltasport@lidl.ie

1. Loosen the axle bolts (17) with two size 5

Allen keys.

2. Pull out the axle bolts (17) and remove the

wheel (18).

3. Install the new wheel and secure it with the

axle bolts (17).

After replacing the wheels:

Do not use the wheels if they pull side-

ways after replacing them! After the

ﬁrst few minutes of riding, make sure

that all screws are still tight and that

nothing has detached or become loose.

Tension the wheel once more to make

sure that it is running quietly and that

the bearing isn’t making any noise.

Replacing the ball bearings

(Fig. H)

1. Remove the wheels (18) as described in the

section “Replacing the wheels”.

2. Use an Allen key to lever out a bearing (19).

3. Remove the spacer (20) from the wheel (18)

and turn it over.

4. Lever out the other bearing (19) with an Allen

key.

5. Press in a new bearing (19). Turn the wheel

(18) over, insert the spacer (20) and then

press in a second new bearing (19).

6. Secure the wheel (18) again as described in

the section “Replacing the wheels”.

Storage and cleaning

We recommend that you clean and dry the item

thoroughly after use.

Remove small stones or other objects that may

have got caught on the rollers. Dry wet or damp

ball bearings with a clean cloth. Grease the

bearings with a suitable bearing lubricant from

the outside to prevent external rust. Always store

the item in a dry place.

Information on disposal

Dispose of the item and its packaging materials

in accordance with current local regulations.

Packaging materials like e.g. foil bags must be

kept away from children. Store the packaging

materials out of reach of children.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Crivit AS 5937 IAN 307525 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 4,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Crivit AS 5937 IAN 307525 Manual

Product: