Manual Crivit AS-2876 IAN 277831 (page 9 of 28) (English, German, Dutch, French, Portuguese, Spanish)

736858

Zoom out

Zoom in

1/28

9GB/IE

Assembly

(Images are examples for all

product variations)

The product is delivered folded up in its

transport condition. To make it ready to ride,

proceed as follows:

Unfold (Fig. A)

1. Loosen the lower quick-release fastener (1).

2. Pull the lever (2) upward and fold the stee-

ring post (3) forward until it locks in place.

3. Secure the folding mechanism by fastening

the lower quick-release fastener.

Attach handlebars (Fig. B)

1. Release the handlebars (4) from the

holders (5).

2. Press down on the locking buttons (6) on the

handlebars and push the handlebars into the

T-pipe (7) on both sides of the steering

column. The locking buttons must audibly

click into the designated holes (8).

Adjusting the steering post

height (Fig. C)

The steering post can be adjusted to

four diﬀerent heights. Only use the pro-

duct after clicking the locking button

into one of the four holes and securing

the steering post with the quick-release

fastener!

1. Loosen the quick-release fastener (9) on the

steering post.

2. Pull the steering post (10) upward until the

locking button (11) locks into one of the four

holes (12).

3. Secure the steering post by tightening the

quick-release fastener.

Steering head bearing (Fig. D)

The steering head bearing is preset at the time

of delivery. in the event that the handlebars

have too much play after some time or become

too stiﬀ, have the steering head bearing adju-

sted by a speciality retailer or a bicycle shop.

To return the Product to its

Transport Condition

1. Release the quick-release fastener (9) on the

bar, press the locking button (11), slide the

bar (10) down as far as possible and lock the

quick-release fastener (9).

2. Press the locking buttons (6) on the grips, pull

the grips out of the T-bar (7) and secure them

on the holders (5).

3. Loosen the lower quick-release fastener

(Fig. E) and pull the lever (2) upward, push

the steering post toward the deck until it locks

in place (Fig. F). Tighten the lower quick-

release fastener (Fig. G).

Use

Riding, braking, parking

(Fig. H)

• Place one leg on the deck (13) and regularly

and push oﬀ with the other leg at regular

intervals to create momentum.

• Step on the brake plate to brake (14).

• Unfold the kickstand (15) to park.

The product may only be parked on a

smooth surface.

Maintenance

Replacing the wheels (Fig. I)

Important! Please observe the technical

data. Wheels that have a diﬀerent dia-

meter can change the riding properties

and, in some cases, possibly endanger

the user. Do not use wheels that cannot

be perfectly mounted.

Never mount wheels that are larger

than the product’s original wheels.

Wheels wear out. This wear and tear results from

many factors, for example the ground, the user’s

size and weight, the weather conditions, the ma-

terial of the wheels and their durability. It is thus

necessary to replace them from time to time.

• Remove the axle bolts (16) using two setscrew

wrenches size 5.

• Remove the axle bolts and remove the wheel.

• Attach the new wheel (17) and secure with

the axle bolts.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Crivit AS-2876 IAN 277831 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 2,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Crivit AS-2876 IAN 277831 Manual

Product: