460579
28
Zoom out
Zoom in
Previous page
1/32
Next page
Slide switch [BACKLIGHT] to select the backlight mode
Power Supply
Slide switch Battery Only Battery & Adapter Adapter only
position
Auto
OFF Disable the backlight function
GETTING STARTED
This Weather Station was designed for easy set up. For best operation, the
following steps are required to be done in the proper sequence.
1. INSERT BATTERIES FOR MAIN UNIT BEFORE DOING SO FOR THE
SENSOR UNITS.
2. RECEIVING UNIT CANNOT BE PROGRAMMED MANUALLY
UNTIL THE WIRELESS REMOTE SENSOR UNIT REGISTRATION
PROCEDURE HAS BEEN COMPLETED.
3. POSITION THE REMOTE UNIT AND MAIN UNIT WITHIN EFFECTIVE
TRANSMISSION RANGE, WHICH, IN USUAL CIRCUMSTANCES, IS
250 FEET.
Although the remote unit is weather resistant, it should be placed away from
direct sunlight, rain or snow.
BATTERY INSTALLATION FOR MAIN UNIT
1. Turn the metal nut anti-clockwise on the bottom of the unit to open and
release the battery compartment;
2. Insert 4 AA size 1.5V alkaline battery as indicate by the polarity;
3. Push the battery compartment back, turn the metal nut clockwise to lock;
Note: Replace the batteries when the low battery indicator appears on
the top-right corner of the LCD.
WIRELESS REMOTE SENSOR REGISTRATION PROCEDURE
1. Insertx4AAbatteriesrsttothemainunit,thetemperaturedisplayshows
--.–Whilethewaveiconwillkeepblinkingfor2minutesindicateunitis
in sensor searching mode.
2. In a second step, insert the x2 AAA batteries for the sensor unit. The LED
onthefrontpanelwillstartashingatarateofonetimeperaround2
seconds indicates channel-1 is in use.
3. WhiletheLEDisashing,pressoncethe[CH]keywillchangethesensor
channel setting to 2. Keep toggle on [CH] key can change channel setting
up to 5. The LED is blinking at a frequency to indicate the channel setting.
i.e. continuous blinks 2 times indicate channel-2 is selected.
Note: If user does not press any key for 10 seconds, it will exit the
channel setting mode and transmit the RF signal. The main unit will
register the temperature reading.
(If the transmitter has the LCD display, the C/F key will toggle the
Wave hand in front
of the IR sensor to
activate backlight for
16 seconds
Wave hand in front
of the IR sensor to
activate backlight for
16 seconds
Wave hand in front of the IR sensor to
activate backlight for 24 seconds
Backlight always on
GB
28
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cresta WX782 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cresta WX782 in the language / languages: Dutch as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info