The temperature display can be in °C or °F. Press t he key “-“ to switch between the mode.
Max./ Min. for the indoor/outdoor temperature and humidity
Press “+” for displaying of indoor/outdoor max./min. of temperature and humidity.
Temperature alert set-up
• Press “Channel” to select the channel (CH1, CH2, CH3) if more than one outdoor sensor
are within reach.
• Press and hold the key “-” ，in the area of outdoor , select ON/OF when flashing.
• Press “MODE” , the upper limit temperature is flashing, use “+” , “-“ to set the maximum alert
temperature.
• Press “MODE “, the lower limit temperature is flashing, use “+” , “-“ to set the minimum alert
temperature.
• When the alert is activated, the alert symbol will be shown.
.
Temperature alert on/off
Press and hold the key “-“ to set the temperature alert on or off.
• Alert on: Temperature alert symbol shown in display
• Alert off: Temperature alert symbol goes out.
Information
• A temperature alert can be set-up for each channel.
• The set-up process cannot be completed if the maximum temperature selected is lower than
the minimum selected temperature.
• The minimum temperature selected must at least be 1°C below the maximum selected
temperature.
Sunrise /Sunset and Moonrise /Moonset
There will be 150 cities’ time for Sunrise /Sunset and Moonrise /Moonset
5 Weather forecast
Sunny Slightly cloudy Cloudy Rainy Storm
Remarks：
：：
：as the weather is forecasted by temperature and air press only,
. The display will have discrepancy with the actual weather sometime.
Barometer and bar and data of history for the past 12 hour of air press.
Air pressure can be in hPa and inHg ,can check the past 12 hour air press by pressing
＂
＂＂
＂HISTORY“
Illumination
Press the key “SNOOZE/LIGHT“ to activate the display illumination for 5 seconds.
36
