689983

Cresta BPM620 Manual

24
Zoom out
Zoom in
Previous page
1/56
Next page
INSERT OR REPLACE BATTERIES
• Remove the battery cover.
• Insert new batteries as indicated in the battery compartment, taking care that
the polarities (+) and (-) are correct.
• Close the battery cover. Use only LR6, AA batteries.
Dispose of empty batteries to the authorized collecting party subject to the
regulation of each individual territory.
CAUTION
Insert the batteries as shown in the battery compartment. If not, the device will not
work. When
- LOW BATTERY mark - blinks in the display, replace all batteries with
new ones. Do not mix old and new batteries. It may shorten the battery life, or cause
the device to malfunction. LOW BATTERY mark
does not appear when the
batteries run out. Please ensure to distinguish the positive polar "+” and the negative
polar “-" of the batteries when replacing the batteries. Batteries, which have fluid on
the surface or which are modified, cannot be inserted into the product. Battery short
circuit must be prevented. Battery life varies with the ambient temperature and may
be shortened at low temperatures. The batteries may leak and cause a malfunction.
Use the specified batteries only. The batteries provided with the device are for testing
the monitor’s performance and may have a shorter life.
Used batteries may leak and damage the main unit. lf you are not going to use the
unit for a long period of time (approximately three months or more), remove the
batteries. Replace worn batteries with their polarities in the correct direction.
TIME AND OF SYSTEM SETUP
1. Press the “SET” key to turn the device on.
2. Press and hold the “SET” key until the year number displays and flashes on LCD
to enter the setting mode.
3. Press the “MEM” key to adjust the year, then press the “SET” key again to save
your setting and enter the month setting mode.
4. Press the “MEM” key to adjust the month. Following the same steps to adjust
date/hour/minute.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cresta BPM620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cresta BPM620 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info