689986

Cresta BPM220 Manual

13
Zoom out
Zoom in
Previous page
1/30
Next page
8 9
INSERT OR REPLACE BATTERIES
• Remove the battery cover.
• Insert new batteries into the battery compartment as shown, taking care
that the polarities (+) and (-) are correct.
• Close the battery cover. Use only LR03, AAA batteries.
Dispose of empty batteries to the authorized collecting
party subject to the regulation of each individual territory.
CAUTION
Insert the batteries as shown in the battery compartment. If not, the device
will not work. When LOW BATTERY mark - blinks in the display, replace all
batteries with new ones. Do not mix old and new batteries. It may shorten
the battery life, or cause the device to malfunction. LOW BATTERY mark
does not appear when the batteries run out. Please ensure to distinguish
positive polar "+” and negative polar “-" of batteries when replacing batteries.
Batteries, which have fluid on the surface or are modified, cannot be inserted
into the product. Battery short circuit must be prevented.
Battery life varies with the ambient temperature and may be shortened at
low temperatures. The batteries may leak and cause a malfunction.
Use the specified batteries only. The batteries provided with the device are
for testing the monitor performance and may have a shorter lifecycle.
Used batteries may leak and damage the main unit. lf you are not going to
use the unit for a long period of time (approximately three months or more),
remove the batteries. Replace worn batteries with their polarities in the
correct direction.
TIME AND OF SYSTEM SETUP
1. Press “SET” key to turn on.
2. Press and hold the “SET” key until the year number displays and flashes
in the LCD display to enter setting mode.
3. Press the “MEM” key to adjust the year, then press the “SET” key again
to save your setting and enter the month setting mode.
4. Press the “MEM” key to adjust the month. Following the same steps to
adjust date/hour/minute.
year month date hour minute
UNIT CONVERSION mmHg/kPa DISPLAY
The default setting of the monitor is mm Hg. Also kPa (kPa) can be set.
Boost continued to press the ON/OFF button exceeding five seconds.
The units will be chosen by the above shows mmHg/kPa after decontrol.
After the normal boot unit values are shown as blood pressure. Also select
memory unit value changes.
WHO BLOOD PRESSURE CLASSIFICATION DISPLAY
Diastolic blood pressure Reference material: journal of hypertension 1999.
vol 17 No.2
Grade 3 hypertension (severe) Grade
2 hypertension (moderate) Grade
1 hypertension (mild)
High-normal
Normal
Optimal
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cresta BPM220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cresta BPM220 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info