618072
12
Zoom out
Zoom in
Previous page
1/23
Next page
cressi.com
PLAN MODE: Dive planning.
While on surface, you can access the PLAN function in order to visualise, depending on the mixture used
(Nitrox or Air), the remaining time available at different depths (no-decompression limits). The values are given
both for the first of a (possible) series of dives and during the surface interval between two or more subsequent
dives; in such case Newton takes into account the residual nitrogen, therefore reducing the times within the no
decompression limits. To access the PLAN MODE, once the computer is on, press the UP button until PLAN is
displayed. Then, press the Mode button. The screen displays the values of the no decompression limits (no
decompression times) related to the different depths between 9 m and 48 m, with manual steps of 3 m achieved
by pressing the UP or DOWN button. Keep the Mode button pressed for a few seconds until hearing an
acoustic signal to confirm exit from the menu.
REMARK: The PLAN function will be switched off if the computer shows Error or in the case it is set in the
GAGE function.
GAGE MODE: depth gauge and timer.
Apart from the S-AIR MODE and S-NITROX MODE, the computer is provided with a third program called
GAGE (depth gauge and timer) that may be used for both apnea divers and for the use in “technical" dives. In
this case, the device just provides the dive basic parameters, i.e. depth and dive time. It does not make tissue
saturation and desaturation computation, which must be programmed and calculated by means of proper
software and/or tables. For such ends, Cressi reminds that all sport dives must be conducted within the no
decompression limits and at a maximum depth of 40 m (limit of sport dives). Exceeding these limits
dramatically increases the possibility of decompression sickness!
IMPORTANT: The Newton computer is designed for sport diving only and not for commercial or professional
use which require longer dive times and greater depths, consequently increasing the risk of decompression
sickness.
DANGER: Cressi discourages diving with gaseous mixtures other than air without proper training. The
use of “technical” multi-gas mixtures may expose the diver to different risks than those of recreational
diving, including serious physical damages and, in extreme cases, death.
IMPORTANT: after a dive in GAGE mode, the device will not make saturation and desaturation calculations for
the next 48 hours.
DANGER: Should you decide to reset the device by accessing the system mode, the nitrogen memory
will be cancelled. Therefore, the device will not be able to calculate the following dive. Before using this
function, wait for at least 48 hours after the last diving activity.
To access the GAGE program, press the UP or DOWN button until “GAGE" screen is displayed, then press the
Mode button. The word OFF/ON will flash. By pressing the UP or DOWN button the Gage program will be
connected or disconnected (ON/OFF).
When the Gage function is active, the MODE-S, DIVE-S and PLAN mode are disabled and on the lower right
section of the display it will appear the “G” icon.
REMARK: the Newton computer is factory set on the SET (MODE-S) AIR MODE function.
REMARK: the depth sensor provides indications between 0 and 120 m.
PLAN MODE
GAGE MODE
12
INDEX
LONG
x4x2
AUTOMATIC
RETURN OR
WITH LONG
MODE BUTTON
BEEP
AUTOMATIC
RETURN OR
WITH LONG
MODE BUTTON
BEEP
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cressi NEWTON at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cressi NEWTON in the language / languages: English as an attachment in your email.

The manual is 8,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info