618064
19
Zoom out
Zoom in
Previous page
1/21
Next page
cressi.com
SYSTEM RESET – DEVICE RESET.
With the reset function, all the calculations related to desaturation eventually in course are set to zero. Dive
logbook, profile and historic memory remain stored in the memory even after the device's reset. This
function may be especially useful in case of device's renting by Diving Centres.
DANGER: Do not reset your device if it has to be used to compute subsequent dives!
The procedure to perform this operation is already explained in the chapter “Before diving”.
CARE AND MAINTENANCE
Giotto by Cressi has been designed and made to operate in extreme conditions with extensive underwater
use. You should remember that it is a precision device deserving appropriate care. Please avoid any
violent shock, protect it from extreme heat sources, always wash it in fresh water after using, dry it carefully
and do not store if wet, avoid contact with heavy equipment, like diving cylinders.
IMPORTANT: avoid contact between the computer and solvents or chemical substances. Do not use
compressed air to dry the computer
The button does not need any particular care: never grease with oil or spray of any kind.
REMARK: When replacing the battery check its housing: should any case of moisture be visible, please
have the device checked by an authorised service centre.
Should you notice any anomaly in functioning, do not use the device to dive and have it checked by an
authorised Cressi retailer.
BATTERY REPLACEMENT.
Replacing the battery is a very simple operation which does not require any special service and which can
be carried out by the user. It must be done every time the device display shows the low battery symbol.
IMPORTANT: when replacing the battery, all information related to desaturation, time and date will be lost.
Reset the time and date, in order to get correct entries in your computer's logbook. Do not replace the
battery when desaturation is in progress since all the information related to desaturation computing will be
cancelled. In this case, do not dive for the next 48 hours. After the battery replacement, all settings go back
to the latest value set by the user. Time and date must be reset.
To replace the battery, unscrew the battery cover on the back of the device, using a coin. Remove the lid
and check the battery and its housing. Should you note traces of corrosion due to water entry, have the
device checked by an authorised Cressi centre. If everything appears in good condition, remove the
battery from its housing by holding the computer face down. Replace the battery respecting the polarity (an
incorrect polarity may damage the device). Before closing the cover, check that there is no soiling on its
seat and apply a thin layer of silicone grease to battery cover seal.
REMARK: it is important to remember that different factors may affect battery life, such as: time of storage
before acquiring the device, dive time, use of backlight, quality of battery whose average life varies
depending, for example, on temperature.
REMARK: Do not over-tighten the battery cover! Over-tightening the cover does not create a better seal;
much on the contrary, it can result in cover cracking or difficulty removing the cover afterwards.
REMARK: Make sure that the device is watertight!
IMPORTANT: any malfunction or water filtration due to incorrect battery replacement will void the warranty.
LOW BATTERY WARNING
MODE
LONG
BEEP-BEEP
INDEX
19
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cressi GIOTTO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cressi GIOTTO in the language / languages: English as an attachment in your email.

The manual is 3,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info