618069
28
Zoom out
Zoom in
Previous page
1/50
Next page
217
By exceeding the depth of 4 ft. the FAEE mode will switch on the
counting, and the display will change as shown in picture 32,
delivering following information and updating it every second:
1 value of current depth, in meters (m) or feet (ft);
2 time of apnoea dive, given in minutes and seconds by the
icon "DIVE T";
3 maximum depth reached during the dive, given in meters
(m) or feet (ft) by the icon “MAX”;
4 indicator of segmented ascent rate
5 icon FAEE.
Other meaningful information may be obtained by keeping A
( ) depressed, as follows (picture 33):
1 value of maximum depth of apnoea dive, in meters (m) or
feet (ft);
2 water temperature, given in C° or °F degrees;
3 Icon of apnoea time alarm (if set);
4 Icon of maximum depth alarm (if set)
By keeping button C ( ) depressed, the display
shows the current time given in hours, minutes and seconds,
as shown in picture 34.
At any moment of your dive, should light conditions not allow you
an easy reading of the display, it is possible to switch on the
back-illumination, by depressing button B ( ). The display
back-illumination will last about 5 seconds and may be repeated
any time you want: the battery consumption is minimal.
The FAEE mode will remain set as long as the diver does not
change the setting.
NOTE: when is set on FAEE (apnoea) mode, you
may set DIVE mode (both air or nitrox); on the contrary, it
won’t be possible to set GAGE mode during the 48 hours
elapsing since last apnoea dive.
DANGER: Cressi-sub strongly recommends to avoid
any apnoea diving after snorkel dives. Moreover, at least
two hours should elapse since the end of a snorkel dive
before starting an apnoea dive, which anyway should not
exceed the allowed maximum depth of 16 ft.
Related topics:
• 2.7.3. -
FAEE
(or Apnoea) mode parameters setting
• 2.7.1. - Maximum depth alarm
• 2.7.2. - Date and time adjustment
• 2.7.3. - Units of measurement setting.
• 3.7.1. - Surface interval after an apnoea dive (SURF) /
Apnoea dives memory and history (HIST)
• 3.7.2. - FAEE dive memory and history (HIST) reset
• 4.1.3. - Surface interval after a FAEE dive
• 4.2.3. - FAEE dive Logbook
• 4.3.3. - FAEE dive memory and history
3.7.1. - Surface interval after an apnoea dive
(SURF) / Apnoea dives memory and history
HIST
At a depth lower than 4 ft. and as long as computer
remains underwater (contact “E” on), its display will deliver
following information (picture 35-a):
1 Surface (or recovery) time, given in minutes (1 a) and
seconds (1 b);
2 Time of
last
apnoea dive, given in minutes and seconds
by the icon “DIVE T.”;
3 Maximum depth reached during
last
apnoea dive, given
in meters (m) or feet (ft) by the icon “MAX”.
4 TOTAL number of apnoea dives performed during the day;
5 Value of current depth, in meters (m) or feet (ft).
ENGLISH
EDY.qxd:EDY Manuale2006-2.qxd 20-06-2008 11:52 Pagina 217
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cressi Edy at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cressi Edy in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info