498217
12
Zoom out
Zoom in
Previous page
1/24
Next page
12
The Controls Smart Dry Models (continued)
(ii) Delayed Start
(Dry Later) Smart
Drying
(iii) Timed Drying
(iv) Easy Iron
Cycle
When using the time delay, select the number of delay hours you
require before the drying programme is required to start.
Select the delay period by rotating the timer knob in a clockwise
direction, to the number of hours delay you require (maximum 8
hours). The dryer will start its programme when the time selected has
elapsed. If you have selected more delay than you require turn the
knob clockwise to select the correct time required. Never wind the
timer control anti-clockwise.
Note:
Ensure that the door is closed
and the start button has been
pressed after setting the required time delay period.
If you open the door after pressing the start button, i.e. to add
articles, remember to press the start button again.
Small loads (less than 1kg) must be dried using the timed
drying programme.
A short programme of around 20 minutes is provided to dry small loads
of less than 1kg.
To select this programme, turn the timer control clockwise until the 20
appears in line with the indicator. Never wind the timer control anti-
clockwise.
About 5 minutes before the programme is completed, the heating ele-
ments are switched off and the programme enters the final ‘Cool
Tumble’ phase.
This is a short programme of approximately 10 minutes to condition
previously dried clothes. See section ‘Easy Iron Programme’.
It consists of a period of heating followed by a short cool tumble
period (as detailed below).
Select high heat for this programme.
It should not be used on damp loads, as it is NOT a drying
programme.
THE START BUTTON MUST BE PRESSED TO START
ALL PROGRAMMES INCLUDING A DELAYED START
(DRY LATER) PROGRAMME.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Creda T630CW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Creda T630CW in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info